Summary of Contents for RG NDT International Inspection Research ShotChek II
- Page 1 Model II Current Pulse Monitor U.S. Patent #4,502,004 Operation Manual V2.0 165 Oates Rd, Houston, TX 77013 ~ (713) 675-5928...
-
Page 2: Table Of Contents
S h o t C h e k ® M o d e l I I O p e r a ti o n M a n u a l V 2 . 0 Table of Contents Section Page Basic Operation Operation Notes Description of Rear Panel Specifications... -
Page 3: Basic Operation
For hands-off operation, the AUTO MODE switch can be moved to the ON position, which will result in the ShotChek® ll performing an automatic reset 5 to 6 seconds after each measurement. U.S. Patent #4,502,004. The ShotChek name and logo are registered trademarks of RG NDT International, Inc. -
Page 4: Operation Notes
6. Pulse width is defined as the time elapsed from the beginning of the pulse to the point at which the current has decayed to 50% of its peak value. Figure 1 U.S. Patent #4,502,004. The ShotChek name and logo are registered trademarks of RG NDT International, Inc. -
Page 5: Description Of Rear Panel
AUTO MODE allows “hands-off” operation of the ShotChek® ll unit even in low ambient light conditions. Leaving the AUTO MODE switch in the OFF position allows the unit to hold a reading indefinitely with no drift. U.S. Patent #4,502,004. The ShotChek name and logo are registered trademarks of RG NDT International, Inc. - Page 6 ShotChek Current Probe to the input jack, otherwise the unit may be damaged and any warranty will be void. Figure 2 ~ REAR PANEL U.S. Patent #4,502,004. The ShotChek name and logo are registered trademarks of RG NDT International, Inc.
-
Page 7: Specifications
Charger 12VDC @ 100mA (min) RG NDT International, Inc. reserves the right to change specifications at any time without incurring any obligation to incorporate those changes into products previously sold. U.S. Patent #4,502,004. The ShotChek name and logo are registered trademarks of RG NDT International, Inc. -
Page 8: Servicing & Calibration
To guarantee conformance to published specifications, servicing and/or calibration must be performed by RG NDT International, Inc. or its authorized agent. There are no user serviceable parts within the unit. Unauthorized opening of the cabinet or other disassembly of any part(s) of the unit will void the warranty. -
Page 9: Warranty
P a g e | Warranty RG NDT International, Inc. warrants that its ShotChek® II unit will be free from defects in materials and workmanship under normal use and service for ninety (90) days from the date of delivery to the customer.
Need help?
Do you have a question about the Inspection Research ShotChek II and is the answer not in the manual?
Questions and answers