KwikFire Elite 2 Series Instruction Manual

XBOX ONE KWIKFIRE
EV2 RAPID FIRE
INSTRUCTION MANUAL
F F
EATURE ACCESS
The EV2 mod uses the "LEFT direc�on on the
D-pad for accessing all of the controllers
features. There is also an op�on of a "MOD"
bu�on on the back of the controller. The
MOD bu�on can be used instead of LEFT on
the D-pad to access all features. Using Le�
or the MOD Bu�on will depend on the
installa�on method. For this guide we will
assume the use of Le� on the D-pad.
When enabling/disabling a feature, unless
otherwise noted, you will see the guide
bu�on LED flash once when enabling and
twice when disabling.
OR
R
APID FIRE MODES
There are 10 built in modes to select from.
Each is pre-programed with a specific speed
(see the chart to the right), these can be
independently programmed to an new speed
in the programming mode(See page 3). To
change to the next mode you must HOLD
LEFT + RT for 8 seconds. You will see the
main LED flash, count the number of flashes
of the LED. This will indicate which mode you
are currently in. (2 flashes = mode 2, 3
flashes = mode 3, etc...).
HOLD 8 Sec
O
VERVIEW
The Xbox One EV2 Rapid Fire mod is a customized mod for
specifically for the Elite V2 controllers. While there are many
features on this controller, we have developed a method of
accessing them which makes it quick and easy.
On the following pages you will find informa�on about each
feature and how to access it. Many features can be used in
combina�on allowing greater flexibility and a greater
enhancement to your gaming experience. Only features which
conflict with each other, such as jump shot and drop shot,
cannot be used at the same �me.
S
UB/EDIT MODES
Several of the mod features have sub modes
or edit modes. Sub modes are modifica�ons
to the main feature. These will be explained
in the descrip�on of each feature. To change
a features sub mode HOLD LEFT on the D-
pad and the bu�on used to ac�vate the
features for 8 seconds.
Example: To change the Jump Shot sub
mode you would HOLD LEFT + A, for 8
seconds, the LED will Flash to indicate which
sub mode you are currently in.
HOLD for 8 seconds
MODE
Mode 1:
Mode 2:
Mode 3:
Mode 4:
Mode 5:
Mode 6:
Mode 7:
Mode 8:
Mode 9:
Mode 10:
Features Enable
Bu�on
SPEED
7.7sps
9.3sps
13.8sps
16.67sps
20sps
6.85sps
8sps
12.5sps
18sps
25sps
R
APID FIRE
Rapid fire gives pistols and semi-auto riffles
that extra kick they need to compete with
the big guns.
Most weapons have a sweet spot for the rapid fire
speed and this is generally between 7 and 16SPS.
Be aware that above this most weapons will start
to fire slow and erra�c. Rapid fire is ac�vated by
holding le� on the D-pad and pulling the Right
Trigger once. When ac�vated the LED will make a
constant flash.
HOLD PULL
B
URST FIRE
Burst fire is a 3-round burst.
Burst fire works with semi-auto weapons.
To ac�vate burst fire hold LEFT on the D-
pad and Pull the right trigger twice. When
ac�vated the LED will light up solid.
HOLD PULL 2x