Summary of Contents for Focused Technology Solutions SpikeEase FTS20182
- Page 1 FTS20182 - Battery Operated Spike Puller Battery Operated Spike Puller Operation Manual www.FocusedTS.com 973.705.7133 customerservice@focusedts.com...
- Page 2 FTS20182 - Battery Operated Spike Puller TABLE OF CONTENTS SAFETY SYMBOLS SAFETY PRECAUTIONS TOOLS STICKERS & TAGS OPERATION MAINTENANCE & TROUBLESHOOTING SPECIFICATIONS DRILL TYPE ACCESSORIES WARRANTY IMPORTANT To fill out a Product Warranty Recording form, and for information on your warranty, call FTS at (973) 705-7187 and request the Warranty form or have your Warranty assigned number ready.
- Page 3 FTS20182 - Battery Operated Spike Puller SAFETY SYMBOLS Safety symbols and signal words, as shown below, are used to emphasize all operator, maintenance and repair actions which, if not strictly followed, could result in a life-threatening situation, bodily injury or damage to equipment.
- Page 4 FTS20182 - Battery Operated Spike Puller SAFETY PRECAUTIONS Tool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the stickers and tags attached to the tool. These safety precautions are given for your safety. Review them carefully before operating the tool and before performing general maintenance or repairs.
- Page 5 FTS20182 - Battery Operated Spike Puller TOOLS STICKERS & TAGS Focused Technology -SpikeEase - Pinch Point Warning Decal – FTS20182-CP02 Focused Technology SpikeEase - Arrow Decal - FTS20182-CP03 Focused Technology - SpikeEase - Eco Friendly Decal - FTS20182-UP01 Focused Technology Logo Decal – FTS SpikeEase Product Label - FTS20182-CP01 NOTE: THE INFORMATION LISTED ON THE STICKERS SHOWN, MUST BE LEGIBLE AT ALL TIMES.
- Page 6 FTS20182 - Battery Operated Spike Puller OPERATION PRE-OPERATION SAFETY INSPECTION CHECK BATTERY POWER SOURCE 1. Make sure the battery is fully charged. 2. Remove battery prior to inspecting the claw or other moving parts of the unit. CHECK TOOL 1. Make sure all tool accessories are correctly installed. Failure to install tool accessories properly can result in damage to the tool or personal injury.
- Page 7 FTS20182 - Battery Operated Spike Puller MAINTENANCE Daily: Check all accessible screws for tightness. Apply two pumps of provided lubricant every three to four hours via maintenance port as in item 7 in operating procedures. Note: Any major repair(s) must be performed by an authorized and certified dealer. Call 973-705-7187. TROUBLESHOOTING If symptoms of poor performance develop, the following points can be used as a guide to correct the problem.
- Page 8 SpikeEase Warranty (less drill) LIMITED WARRANTY Focused Technology Solutions manufactured products purchased in the U.S., Canada or Europe come with a limited warranty; if properly used and installed, will be free from defects in material and workmanship for a period of 90 days after the date of purchase.
- Page 9 FITNESS FOR A PARTICULAR PURPOSE. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THIS LIMITATION MAY NOT APPLY TO YOU. TO OBTAIN WARRANTY SERVICE, CONTACT FOCUSED TECHNOLOGY SOLUTIONS FOR A RETURN MATERIAL AUTHORIZATION. WHEN RETURNING EQUIPMENT TO FOCUSED TECHNOLOGY SOLUTIONS, THE CUSTOMER ASSUMES THE RISK OF DAMAGE OR LOSS DURING SHIPPING AND IS RESPONSIBLE FOR THE SHIPPING COSTS INCURRED.