Page 1
Power Over Ethernet Adapter Kit Use this guide to install : WAPPOE User Guide...
Page 2
(the "Warranty Period”). Your Linksys product will be free of defects in materials and workmanship under normal use. Your exclusive remedy and Linksys's entire liability under this warranty will be for Linksys at its option to repair or replace the product or refund Your purchase price less any rebates.
Chapter 1: Introduction The Power Over Ethernet Adapter Kit The Linksys Power Over Ethernet Adapter Kit lets you put your access points almost anywhere, by removing the requirement of nearby power outlets. By using the existing Category 5 Ethernet cabling to deliver power to any standard 5 volt access point or other network device, you save the time, hassle, and expense of running AC power to the access point's installation location.
Chapter 3: Connecting the Power Over Ethernet Adapter Kit The Power Over Ethernet Adapter Kit is used to move your access point, wire- less router or bridge to a remote location that is not close to a power outlet. The diagram in Figure 3-1 shows how the Power Over Ethernet Adapter Kit is connected to your wireless network.
For devices using conventional power connections To connect the Power Over Ethernet Adapter Kit: 1) Connect the kit’s power adapter to the Injector and plug the power adapter into a surge protector or power socket. 2) Connect the Injector’s RJ-45 Cat 5 Ethernet cable to your network.
RESPONSIBLE FOR SHIPPING AND HANDLING CHARGES. PLEASE CALL LINKSYS FOR MORE DETAILS. Appendix C: Contact Information For help with the installation or operation of this product, contact Linksys Technical Support at one of the phone numbers or Internet addresses below. 800-546-5797 (LINKSYS)