PHYWE Systeme GmbH & Co. KG
Robert-Bosch-Breite 10
D–37079 Göttingen
+49 (0) 551 604–0
Telefon
+49 (0) 551 604–107
Fax
E-mail
info@phywe.de
Internet
www.phywe.com
Operating
instructions
The unit complies
with the applicable
EC-guidelines
TABLE OF CONTENTS
1
SAFETY PRECAUTIONS
2
PURPOSE AND CHARACTERISTICS
3
FUNCTIONAL AND OPERATING ELEMENTS
4
NOTES ON OPERATION
5
HANDLING
6
TECHNICAL DATA
7
SCOPE OF DELIVERY
8
ACCESSORIES
9
CONFORMITY
10 DISPOSAL
11 EXPLANATION OF THE SYMBOLS
www.phywe.com, © All rights reserved
Cobra SMARTsense Blood Pressure
Fig. 1: 12944-00 Cobra SMARTsense Blood Pressure
1
SAFETY PRECAUTIONS
Caution!
Carefully read these operating instructions completely
before operating this instrument. This is necessary to
avoid damage to it, as well as for user-safety.
Only use the instrument for the purpose for which it was
designed.
Only use the instrument in dry rooms in which there is no
risk of explosion.
Protect the instrument from dust, moisture and vapours.
Use a slightly moist lint-free cloth to clean the instrument.
Do not use aggressive cleaning agents or solvents.
Take care that no liquid penetrates in through the hous-
ing openings, as such penetration would result in dam-
age to Sensor.
Do not open the unit.
2
PURPOSE AND CHARACTERISTICS
The sensor is used to measure blood pressure.
The measured values are transmitted via Bluetooth or USB to
any terminal devices such as tablets, smart phones, etc.
The sensor is neither suitable nor approved for medical pur-
poses. It is intended solely for didactic purposes. This device
must not be used for defined measurements on humans in
order to diagnose an illness or disease, i.e. it is not intended
for monitoring, treating or alleviating illnesses or diseases. As
a consequence, it is not subject to the strict constraints of the
Medical Devices Act.
12944-00
1
12944-00 / 4021