Lian Yi Da Science CM203C User Manual

CM203C Wireless Transmitting Camera
Thank you for using CM203C Wireless camera. Please read this manual carefully before
you use it. And it will benefit you to use this product better.
DO NOT use the product to monitor products or activities that are relevant to people's life.
1. Monitoring or products or activities concerned directly with people's life.
2. Monitoring related to people's security, antiques or rare articles.
*For it is not designed and manufactured for these purposes.
DO NOT put the product too close to medical equipment.
1. Radio waves might cause breakdown of medical electrical equipment thus causing incidents.
2. Place the product at least 22cm away form a heart pacemaker. Radio waves may influence heart
pacemakers and lead to respiratory disturbance.
DO NOT use the product to carry out any illegal activities (such as sneak preview, etc.)
DOMEMEIE NOT put the package plastic bags in reach of children or babies.
*It might cause asphyxia if children or babies put the bags into their mouths.
DO NOT plug the AC adapter into the outlet in improper situation.
*Plucking or plugging AC adapter by Wet hand might cause electric shock.
Plugging AC adapter unsteadily might cause fire or electric shock.
DOT NOT cover the AC adapter when it is connected to power socket DO NOT place the adapter
near heaters and DO NOT put it on the floor which is equipped with a heater.
*The above mentioned operations might cause fire or incidents.
DO NOT use it aboard; please abide by the airway's provision.
*It might influence communications aboard and flying apparatus. This will result in accident, possible death
and severe physical hurt.
DO NOT put the camera in a wet place where water might splash or where rainwater and mist
might cause corrosion (Except for weather-proof series).
*Such a place might cause fire, shock, short circuit, etc.
DO NOT disassemble or repair the camera, the receiver and other relevant peripherals.
*Improper disassembly might cause damage to the product or the peripherals.
DO NOT put the camera in quaky places.
*The camera may be unstable or out of operation if installed improperly. Such installation may also cause
breakdown.
DO NOT use the receiver on the surface of thermolabile material.
*Please embed thermal insulating material when using on the surface of any thermolabile material.
DO NOT place or use the AC adapter on temperature sensitive materials.
*The above practice might cause plastic distortion, fading or sticking on the surface.
DO NOT use several cameras with neighbouring frequencies working to close at the same time.
*The electromagnetic wave signals of the neighbouring frequencies might cause slight interferences and so
influence the receiving effect.
DO NOT let several cameras with the same frequency work at the same time.
*The overlap of the electromagnetic wave signals of the same frequency might cause severe interferences and
so result in failure to receive signals.
DO NOT use the camera in places which are covered by metal.
*The surrounding metal such as elevator, cabin, might shield the electromagnetic waves, and result in failure to
receive signals.
User Manual

OPERATING RESTRICTION