Advertisement
D.In the following screen, select Search for the best driver for your device
(Recommended). Click the box beside Specify a location and type D:\ in the
field below. Then, click Next.
D
E. A window will open saying that Windows is now ready to install the Linksys
EtherFast 10/100 Compact USB Network Adapter driver. Click Next.
E
F. Windows will begin copying the driver files to your computer. When
Windows finishes, click Finish.
G. When asked if you want to restart your PC, remove the Driver CD-ROM and
click Yes. If Windows does not ask you to restart your PC, click Start. Choose
Shut Down, select Restart, and click OK.
Installation of the EtherFast 10/100 Compact USB
Network Adapter is complete.
Note: Do not click Cancel or
Windows 2000 Driver Installation
Skip at any time during the
Instructions
installation process. Doing so
will prevent your driver from
being properly installed on
A. If you haven't already, start your computer.
your PC.
B. Windows will display the "Welcome to the Found New Hardware Wizard"
screen. Click Next.
C. The "Install Hardware Device Drivers" dialog screen will appear. Select Search
for a suitable driver for my device (Recommended) and click Next.
C
D. The "Locate Driver Files" dialog screen will appear. Select the Specify a loca-
tion option and insert the Driver CD-ROM into your CD-ROM drive. Click
Next.
D
E. In the "Copy manufacturer's files from" field, type D:\ and click OK.
E
F. The Driver File Search Results dialog screen will appear. Click the Next button.
G. When Windows asks you to search for a digital signature, click Yes to continue
your installation.
H. The Completing the Found New Hardware Wizard dialog screen will appear. The
following adapter name will be shown: Linksys EtherFast 10/100 Compact USB
Network Adapter. Click Finish. Remove the Driver CD-ROM from the CD-
ROM drive.
Installation of the EtherFast 10/100 Compact USB
Network Adapter is complete.
Windows XP Driver Installation
Note: Do not click Cancel or
Skip at any time during the
Instructions
installation process. Doing so
will prevent your driver from
being properly installed on
A. If you haven't already, start your computer.
your PC.
B. Windows XP will automatically
detect the presence of the
Compact
USB
Network
Adapter hardware in your com-
puter and display the Found
New Hardware Wizard window.
Click the Install from a list or
specific location (Advanced)
radio button. Insert the Driver
CD-ROM in your CD-ROM
Drive. Click Next.
B
C. Select
Search
for
the
best
driver
in
these
Only select the Include this location in the search: option, and enter D:\ in the location
box. Click Next.
C
D.When the wizard completes its task, the Hardware Installation box at right will appear.
Click Continue Anyway.
D
E. The Completing the Found New Hardware Wizard dialog box will appear. Click Finish.
Remove the Driver CD-ROM from
your CD-ROM Drive.
E
Installation of the EtherFast 10/100 Compact USB
Network Adapter is complete.
QI-USB100M-C-20322NC TE
W W W . L I N K S Y S . C O M
locations.
Advertisement
