Settings; Highway/City Mode - Cobra Pro 9680 Operating Instructions Manual

11 band ultra high-performance digital radar/laser detector with xtreme range superheterodyne technology
Hide thumbs Also See for Pro 9680:
Table of Contents

Advertisement

Settings

Your Detector
Settings

Highway/City Mode

Your detector has a Highway mode and three (3) different levels of City
modes: City X, City X Beep Off and City X+K. City X mode sounds a single
beep when the signal is first detected. City X Beep Off mode prevents all
X band audio alerts until the signal strength reaches Level 3. City X+K mode
combines the City X mode with prevention of K band audio alerts until the
signal strength reads Level 2. This will reduce false alerts while you are
driving in or near urban areas where there are many sources for conflicting
X or K band signals such as microwave towers and automatic door openers.
The factory setting is Highway. The factory City mode default setting is City X.
Set/City Button
Press and release
To Change From Highway Mode To City Mode
Press and release the
Tone
Set/City button.
One (1) beep
City Mode
NOTE
When you change to City mode, the unit will enter
N W
c
whichever city default mode is set at the time.
To Change From City Mode Back To Highway Mode
Press and release the
Tone
Set/City button again.
Two (2) beeps
Highway Mode
N W
h
10 English
Visual Display
c appears in the display
Visual Display
h appears in the display
Settings
Your Detector
Setting City Default
You can set the default level for City mode (City X, City X Beep Off and
City X+K) either in Program mode or directly using the Set/City button.
Set/City Button
Press and hold
To Set The City Mode Default Directly Using The Set/City Button
Press and hold the
Tone
Set/City button.
One (1) beep each time
the display cycles
Release the Set/City
None
button to select the
current display as
default.
To Set The City Mode Default Using Program Mode
(See Page 7 For Instructions On Using Program Mode)
In Program mode,
Tone
go to City.
One (1) beep
One (1) beep
Two (2) beeps
City X Beep Off
City X
Beep Off
City X
Press and
hold the
City
Set/City
X+K
button
City X
Beep Off
Visual Display
Cycles — see chart above
City X Beep Off,
City X+K or City X
Visual Display
City X Beep Off
City X+K
City X
City X+K
City X
City X+K
City X
Nothing comes close to a Cobra
®
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xrs 9600

Table of Contents