Mybelle 373 - Chic Deluxe Telephone Manual

Carefully read and observe the instructions in this manual.
Save these instructions for later use

At a Glance

Installation

Plug one end of the curly handset cord into the socket provided on the end of the handset, and the other end to the socket on the back of the phone.
Connect the straight telephone line cord to the socket under the base of the phone and the other end to the telephone wall outlet.

Ringer Volume Switch

Under the base of the phone you will find a 3 position switch which can be used to adjust the ringer volume between OFF, LOW or HIGH. Use the OFF position when you don't want to be disturbed.

Making an Outgoing Call

Pick up the handset and wait until you hear dial tone.
Dial the number you require on the keypad.
When the call is completed, replace the handset.

Last Number Redial

The Mybelle will store the last number dialled. This may be useful when calling a number that is busy or unanswered. To redial the number -

1. Press and release the Hookswitch
2. Press the Redial button

Recall and Recall Time Setting

Some network services require the use of a Recall signal. This phone generates a Timed Break Recall (TBR).
The period of the Recall signal can be adjusted between 100mS and 300mS, by the switch under the base.
For use in the UK and most other European countries, the switch should be set to 100mS. For use in France, the switch should be set to 300mS.

Press the R button when a recall is required.

Guarantee

This product is guaranteed against manufacturing defects, for a period of 12 months from the date of purchase.
If this product becomes faulty within the terms of the guarantee, please return it to you supplier with a copy of the purchase invoice.
This guarantee does not cover faults due to: Misuse; negligence; faults on the telephone line; damage due to lightning.

Specification

This product has been manufactured in accordance with the European RTTE directive. It complies with the European Low Voltage Directive 72/23/EEC and the European EMC Directive 89/336/EEC.
EN60950 including amendments 1 to 5 (Safety), EN55022:1998 (EMC Emissions), EN55024:1998 (EMC Immunity)
For a copy of the Declaration of Conformity for this product, please write to Lazerbuilt Ltd, 20 Gunnels Wood Park, Stevenage, Herts, SG1 2BH. England

Recycle

Please take care when disposing of this product. At the end of the products life it should be entered into a recycling scheme. It should not be disposed of in normal domestic waste

Made in China for Lazerbuilt Ltd (www.lazerbuilt.co.uk)