Roav SmartCharge F3 Manual

Safety Instructions

Important Safety Instructions

SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for the car charger of Roav SmartCharge F3 (R5132).

Please read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, the warranty does not apply.

• Read all instructions and cautionary markings before using this product.
• Do not expose to rain, moisture, or snow.
• Use of an attachment is not recommended or sold by the manufacturer may result in a risk of fire, electric shock, or injury to persons.
• Do not operate this car charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified service person.
• Do not disassemble this car charger; take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
• To reduce risk of electric shock, unplug this car charger before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.
• To reduce risk of fire or electric shock, do not interconnect output terminations.
• To reduce risk of fire or electric shock, do not interconnect output terminations.
• Avoid long exposure to direct sunlight, which may cause damage to the device.
• Exposing this product to open flames may cause it to explode.
• Do not use this product in strong magnetic fields.
• Use a dry, soft lint-free cloth to clean. Do not use any corrosive cleaner or oil to clean.
• 
  For continued protection against risk of fire, replace only with the same type and ratings of fuse, fuse rating is 63V DC / 7A.
• Always obey traffic laws and pay attention to the road. Do not attempt to use this device while driving, as some features are limited while the vehicle is in motion. Failure to pay full attention to the operation of your vehicle could result in death, serious injury or property damage. You assume total responsibility and risk for using this device.

What's Included

Roav SmartCharge F3

Manual

At a Glance

1. Quick Charge 3.0 USB port
2. AUX socket
3. Microphone
4. USB port
5. LED display
6. M/Mode button
7. /Multi-function button
9. CH
   • Press to display the FM frequency.
10. MicroSD card slot
11. Car Charger

Press and hold for 5 seconds to power on/off.

LED Display Guide

LED Display	Status
NOTCONNECTED flashes	Bluetooth not connected
90.0 *The FM frequency may vary depending on the default setting.	Bluetooth connected
NO CARD	No microSD card detected
WAITING...	Reading a microSD card
CARD ERROR	A card error has occurred and the card cannot be read.
NO USB DISK	No USB drive detected
WAITING...	Reading a USB drive
USB ERROR	A USB error has occurred and the USB drive cannot be read.
	Press and hold M. When the USB drive or microSD card is read, music mode shows from left to right: Shuffle, Repeat All, Repeat One

The UI is subject to change without notice.

Getting Started

1. Plug Roav SmartCharge F3 into your vehicle's cigarette lighter socket.
2. Start your vehicle's engine.
   The LED display will light up, and show the Roav logo and current voltage of the car battery.
3. Download the Roav Charger app from the App Store (smartphones running iOS 10.2 or higher) or Google Play (smartphones running Android 5.0 or higher).
   
   
   
   
   
4. Enable Bluetooth on your smartphone and search for available Bluetooth devices.
5. Select "Roav F3_XXXX"and connect.
   Once successfully connected, will stop flashing.
   

FM Transmitter

The Roav SmartCharge F3 allows you to connect your phone to your car's stereo via FM signal. There are two ways to set up:

Use the F3

1. Press and hold CH for one second when using the F3 for the first time.
   F3 begins to search an unoccupied FM frequency.
2. Turn on the FM radio in your car and tune it to the FM frequency set on the F3.
3. To customize your FM frequency:
   1. Press CH on F3.
      FM frequency displays on the LED screen.
   2. Press to select a FM frequency. Make sure the transmitting frequency matches the frequency your radio is tuned to.
      

Use the Roav Charger App

Follow the on-screen instructions in the Roav Charger app to complete connection via FM Radio.

1. Tap the "FM radio".
2. Tap "SmartScan" (Figure a).
   The Roav Charger App begins to search an unoccupied frequency.
3. Press and hold one preset station to customize stations.
4. Adjust the slider or tap to choose a radio frequency (Figure b).
   
5. Tap "Set". Once chosen, the previous presets are replaced by the new ones.
6. Turn on the FM radio in your car and tune to a frequency that matches the frequency set on the Roav Charger App.
7. Play audio from your phone.
   You will hear the audio from the car stereo.

You can also connect the car charger to your car's stereo by using a 3.5mm AUX cable.

Playing Music

When the car charger F3 is successfully connected to your smartphone, you can press the multi-functional button to play music from your phone. Music can then be streamed to your car's sound system via FM transmitter or the AUX socket. You can also insert a USB flash drive or a microSD card to enjoy music that is stored on these devices.

Play / Pause	Press
Previous / Next track	Press
Select a music mode	Press and hold M. Press

To further reduce echo and background noise on your calls and music, you can connect a 3.5 mm AUX cable (not provided) to the AUX socket of the car charger and the AUX-In socket of your car's audio system.

Hands-Free Calling

When the car charger is successfully connected to your smartphone, you can enjoy convenient hands-free calling.

Answer / End a call	Press
Reject a call	Press and hold for 2 seconds

Charging Your Devices

Roav SmartCharge F3 has two USB charging ports (one 5V/1A output port and one Quick Charge 3.0 port). You can charge two devices at the same time with a maximum output of 22W.

Specifications

Customer Service

Videos

ROAV SmartCharge F3 - Unbox Video

Documents / Resources

References

• Home - Roav
• App Store - Apple
• Google Play

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Roav SmartCharge F3 Manual