Summary of Contents for EVEXPERT EVECUBE 2C
- Page 1 EVECUBE 2C EV Expert Wallbox 2x22kW (for the European Union and Norway) USER MANUAL...
-
Page 2: Table Of Contents
CONTENT IMPORTANT SAFETY INSTRUCTIONS WARNING TECHNICAL SPECIFICATIONS INSTALLATION CONFIGURATION AND FIRST RUN CONNECTION DISCONNECTION STATUS SIGNALING ERROR MESSAGES PROBLEM SOLVING MAINTENANCE EU DECLARATION OF CONFORMITY WARRANTY CONDITIONS EV Expert s.r.o. | info@evexpert.eu | www.evexpert.eu Page 2... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS This document contains important instructions and warnings that must be followed when using the EVECUBE 2C charging station from EV Expert s.r.o. WARNING Read this document before using the charging station. Failure to follow some of the instructions or warnings described in this document may result in fire, electric shock, serious injury, or death. -
Page 4: Technical Specifications
Management and invoicing system Web Server, EVE.Charge or other OCPP compatible systems Communication protocol OCPP, Wiegand 26 (RFID) OCPP version v1.6 (JSON) Data connection LAN, WIFI, UART Management and configuration interface Web Server EV Expert s.r.o. | info@evexpert.eu | www.evexpert.eu Page 4... -
Page 5: Installation
The Web Server is used to manage the charging station. 7. Then, if everything is OK, the LED is blue (authorization via web interface, RFID or remote management system) or green (no authorization is needed for charging). EV Expert s.r.o. | info@evexpert.eu | www.evexpert.eu Page 5... -
Page 6: Connection
Close the charging port cover. If the power supply is interrupted, the station automatically unlocks the charging cable lock from its own backup source as soon as a power failure is detected. EV Expert s.r.o. | info@evexpert.eu | www.evexpert.eu Page 6... -
Page 7: Status Signaling
Check that the neutral wire is connected correctly (this operation may only be performed by a qualified person). overvoltage Check that the voltage is correct at each stage (this operation may only be performed by a qualified EV Expert s.r.o. | info@evexpert.eu | www.evexpert.eu Page 7... -
Page 8: Problem Solving
In case of contamination, use a microfiber cloth that has a non-abrasive structure and water, or clean the surface of the charging station with a non-abrasive solvent-free cleaner. To maintain the gloss and protect the brushed stainless steel surface, agents designed for stainless steel surfaces are recommended. EV Expert s.r.o. | info@evexpert.eu | www.evexpert.eu Page 8... - Page 9 EV Expert s.r.o. | info@evexpert.eu | www.evexpert.eu Page 9...
-
Page 10: Eu Declaration Of Conformity
IČ: 056 99 711 as manufacturer, declare under our sole responsibility that the following referenced vehicle charging products: Charging station EVECUBE 2C (serial number printed on the body of each charger) is in conformity with the applicable requirements of the following directives:... -
Page 11: Warranty Conditions
The carrier is responsible for such damage. 6. Updates to the system software and firmware of the charger components aimed at improving or correcting the safety and functions of the charger EVECUBE cannot be considered warranty actions. EV Expert s.r.o. | info@evexpert.eu | www.evexpert.eu Page 11... - Page 12 3. The returned defective product must not be disassembled or modified without the prior written consent of EV Expert. Email contact address is info@evexpert.eu Contact phone is +420 722 689 252 EV Expert s.r.o. | info@evexpert.eu | www.evexpert.eu Page 12...
- Page 13 VAT ID: CZ05699711 Stupkova 18, 779 00 Olomouc Czech Republic For more information visit: www.evexpert.eu or contact at info@evexpert.eu...
Need help?
Do you have a question about the EVECUBE 2C and is the answer not in the manual?
Questions and answers