Motorola 200IP-2P User Manual page 48

Select Country
Ring Volume
Handset Volume
Speaker Phone
Volume
Headset Volume
Handset MIC Volume The handset MIC volume default is Lv3, the range is 1~7.
Speaker Phone MIC
Volume
Headset MIC Volume The headset MIC volume default is Lv3, the range is 1~7
Audio Codec
Jitter Buffer
Min Delay
Max Delay
Play Load Length
High Rate Of G723.1 Enable/Disable High Rate of G723.1 feature.
VAD
Echo Suppression
Mode
Side Tone
7.9 Ring
Internal ringer text:
This Internal ringer text enables the server to distinguish between internal and external
rings. The trace head-info must include "Alert-Info: ;info=".
Internal ringer file:
According to the defined Internal ring text, play the corresponding Internal Ring File.
Motorola
Select the country dial tone. Default is United States.
The ring volume default is Lv3, the range is 0~9.
The handset volume default is Lv5, the range is 1~9.
The speaker volume default is Lv5, the range is 1~9.
The headset volume default is Lv3, the range is 1~9.
The speaker MIC volume default is Lv3, the range is 1~7
Use the navigation keys to highlight the desired one in the
Enabled/Disable Codes list, and press the
other list.
The min delay range setting , default is 60.
The max delay range setting , default is 150.
The play load length setting, default is 30ms.
Enable/Disable VAD feature.
Enable/Disable Echo Suppression Mode feature.
Enable/Disable Side Tone feature.
/ to move to the