Table of Contents
Advertisement
Protocol Configuration Menu
You can access the protocol configuration menu by pressing 2
at the main menu.
Use this menu to change the hub's IP address, subnet mask,
and default gateway address. The default values for these vari-
ables are shown in the menu below.
Network Management Module Setup
--------------------------------------------------
[1] This Hub's IP Address:
[2] Subnet Mask:
[3] Default Gateway:
[X] Exit
Press one of the keys above to change a setting
or Exit: _
Once you have entered the new values that you wish to use,
press X to return to the main menu.
Protocol Configuration
192.168.0.1
255.255.255.0
192.168.0.254
12
Advertisement
Table of Contents
