Advertisement
Antenna Stand for TNC Connectors
Features
• Relocate your Wireless-B or Wire-
less-G Access Point's antennas to
avoid obstacles and improve
signal strength
• Easy to install and use, no config-
uration necessary
• 3-years limited warranty
Linksys
A Division of Cisco Systems, Inc.
18582 Teller Avenue
Irvine, CA 92612 USA
E-mail:
sales@linksys.com
support@linksys.com
Web:
http://www.linksys.com
Linksys products are available in more than 50
countries, supported by 12 Linksys Regional Offices
throughout the world. For a complete list of local
Linksys Sales and Technical Support contacts, visit
our Worldwide Web Site at www.linksys.com.
Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2004
Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.
AS2TNC-DS-40627NC KL
Specifications
Model Number
AS2TNC
Connector
Two Reverse TNC, Two TNC
Cable Length
6 feet (152.4mm)
Environmental
Dimensions
7.87" x 1.81" x 2.80"
W x H x D
(200 mm x 46 mm x 71 mm)
Unit Weight
7.58 oz. (0.22 kg)
Operating Temp.
-4ºF to 149ºF (-20ºC to 65ºC)
Storage Temp.
-22ºF to 167ºF (-30ºC to 75ºC)
Operating Humidity 0% to 85% Non-Condensing
Works With:
• WRT54GS
• WRT54G
• WAP54G
• BEFW11S4
• WAP11
• HGA7T (High Gain Antennas)
Package Contents
• One Antenna Stand for TNC
Connectors
• Wall Mount screws
Product Data
AS2TNC
Model No.
Model No.
Advertisement
