Subscribe to Our Youtube Channel
Related Manuals for Digitus DA-20300
Summary of Contents for Digitus DA-20300
- Page 1 USB CONDENSER MICROPHONE, STUDIO WITH DESK STAND Quick Installation Guide DA-20300...
-
Page 2: Table Of Contents
Table of Contents Introduction ................3 Feature ..................3 Package Content ................. 3 Specifications ................4 Microphone setup ............... 4 Power requirements ..............5 Set your input level ..............5 Settings ..................6... -
Page 3: Introduction
1. Introduction The DIGITUS USB PC Condenser Microphone is ideal for audio recording, video conferences, phone conferences, gaming or live streaming. The recording microphone is delivered with a 1.5 m long USB cable and a stand. The microphone supports directional recording with cardioid characteristics, which reduces disruptive environmental noise. -
Page 4: Specifications
4. Specifications Frequency response: 30Hz-20 kHz Sensitivity: -34dB ± 2dB (0dB = 1V/Pa at 1kHz) Output impedance: 150Ω ± 30% (at 1kHz) Load impedance: ≥1000Ω Equivalent noise level: 16dBA Maximum sound pressure level: 130dB (at 1kHz ≤1% T.H.D) Signal to noise ratio: 78dB Electrical current: 3mA Material: Metal 10. -
Page 5: Power Requirements
6. Power requirements The microphone is powered by the USB port of the used device, meaning that in most instances you can just plug the microphone in and get started right away. The is plug & play USB device, compatible with both Windows and Mac computers. -
Page 6: Settings
The sensitivity of the microphone can be adjusted in real time through the sound card attribute microphone. It can be adjusted well according to personal preference Can monitor the size through the total volume of the computer If the desktop microphone is used alone, the original sound card device can be disabled on the computer device to prevent conflicts If the computer cannot recognize the desktop microphone,... - Page 7 Adjusting the input level on a Windows computer: Step 1: Right click the computer right voice Icon, enter the sound control panel, and click record...
- Page 8 Step 2: Select the microphone, Click on the properties below Step 3: Click Advanced, select 48000Hz, Finally, click OK...
- Page 9 Control the microphone From the Sound control panel, on the Playback tab, right-click on Speakers Default Device and select Properties. On the Levels tab, adjust the Microphone volume slider to adjust the level of microphone monitoring. NOTE Do not cover the microphone grille with your hand Regular maintenance is recommended to avoid electricity erratic and acoustic problems.
Need help?
Do you have a question about the DA-20300 and is the answer not in the manual?
Questions and answers