Flow-Rite Eagle Eye Elite IV Installation & Operation Instructions

Contents
(1) Deep cycle battery level sensor
(1) Mounting plate
(1) Instruction sheet
(2) Zip ties
1
Non-Main Batteries
Locate your main batteries (main positive and
main negative).
Probe must be installed in a non-main battery.
3
Snap the Eagle Eye sensor in the open space
on the flex manifold.
5
Secure the control box with a provided zip tie
in a secure location.
BL-642-0721
Eagle Eye Elite IV
In-Valve Battery Level Sensor with
Pro-Fill Flex and Rigid Manifolds
INSTALLATION &
OPERATION INSTRUCTIONS
for BG-C48V-11-EA-WS & BG-C48V-21-EA-WS
Tools Required
1/2˝ wrench
Rubber gloves
Safety glasses
1/2˝ drill bit (For remote use)
Main Neg
Main Pos
Specifications
Max current draw: 7mA
Nominal operating voltage: 12 - 48V
Operating temperature: -22°F - 158°F
2
Install the valves on the rigid manifolds by
inserting and twisting in to secure.
Note: Leave battery 4 open for flex manifold.
4
Sensor Valve
Insert flex manifold valves into battery 4 and
twist in to secure. Attach snake tubing to the
ends of the manifold.
6
Attach the red wire to the positive terminal of the
positive main battery. Connect the black wire to
the negative of the negative main battery.