Ozito HPW-1885K Instruction Manual
Ozito HPW-1885K Instruction Manual

Ozito HPW-1885K Instruction Manual

High pressure washer kit

Advertisement

Quick Links

HIGH PRESSURE
WASHER KIT
1500W 1885PSI
INSTRUCTION MANUAL

SPECIFICATIONS

Mains Voltage:
230-240V ~ 50Hz
Input Power:
1500W
Allowable Pressure: 13MPa (1885psi)
Rated Pressure:
9MPa (1305psi)
Max. Flow Rate:
8L/min
Rated Flow:
5L/min
Max. Inlet Pressure: 1MPa (145psi)
Hose Length:
5m
Power Cord Length: 5m
IP Rating:
IPX5
Noise Rating:
92dB
Weight:
7.6kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
Ozito Industries Pty. Ltd.
25 Fox Drive, Dandenong South, Victoria, Australia 3175.

WARRANTY

The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of 36 months from the original date of purchase. If
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: valve adapters and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
STANDARD EQUIPMENT
Pressure Washer & High Pressure
Hose
RELEASE
RELEASE
RELEASE
Spray Gun, Adjustable Turbo Lance,
Extension Lance, Patio Cleaner,
Foam Bottle & Wash Brush
2 x Wheels, Handle, 2 x Screws,
Accessory Holder, Cable Hook,
Cleaning Needle & Hose Adaptor
with Filter
HPW-1885K
0722

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HPW-1885K and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito HPW-1885K

  • Page 1 • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. • Professional, industrial or high frequency use. Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria, Australia 3175. 0722...
  • Page 2 KNOW YOUR PRODUCT SETUP & PREPARATION HIGH PRESSURE WASHER 1. ASSEMBLY 1. Transport Handle 10. Accessory Storage Holder 2. Spray Gun 11. Adjustable Turbo Lance 3. On/Off Dial 12. Hose Release Button WARNING! ENSURE THE TOOL IS TURNED OFF AND 4.
  • Page 3 2. ACCESSORIES Attaching The Spray Gun & Accessories WARNING! ENSURE THE TOOL IS TURNED OFF AND DISCONNECTED FROM THE POWER SUPPLY BEFORE 1. Push the desired accessory PERFORMING ANY OF THE FOLLOWING OPERATIONS. into the spray gun lance and twist clockwise to lock it into place.
  • Page 4 OPERATION 3. CONTROLS WARNING! NEVER RUN BLEACH OR DETERGENTS NOT WARNING! THE POWER SUPPLY FOR THIS PRODUCT DESIGNED FOR PRESSURE WASHERS IN THE UNIT TO MUST BE PROTECTED BY A RESIDUAL CURRENT PREVENT DAMAGING THE PUMP. DEVICE (RATED AT 30mA OR LESS). Using The Foam Bottle The high pressure washer is designed to force water at high pressure via a pump through a concentrating nozzle.
  • Page 5 WARNING! ENSURE THE PRESSURE WASHER IS 1885PSI PLACED ON A FLAT, HARD SURFACE. ALWAYS HAVE 1600W THE PRESSURE WASHER IN AN UPRIGHT POSITION DURING USE. HIGH PRESSURE WASHER HPW-1885K...
  • Page 6 5. TROUBLESHOOTING WARNING! ALWAYS TEST THE SPRAY JET ON A Symptom Possible Cause Suggested Solution SMALL INCONSPICUOUS AREA TO ENSURE THE Fluctuating Check that the SETTINGS WON’T CAUSE ANY DAMAGE TO THE pressure connections are SPRAYED SURFACE. The pump is drawing securely installed.
  • Page 7 If replacement of the supply cord is necessary, this has to be done by a certified electrician in order to avoid a safety hazard. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the tool by an unauthorised person...
  • Page 8 The power supply for this product should be protected by a residual current device (rated at 30mA or less). A residual Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand. current device reduces the risk of electric shock.

Table of Contents