Page 3
General Care and Safety Guide YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
Page 4
• Do not use on an adjustable bed. • If you find any damage to your electric pillow, if your electric pillow does not work, or is not working properly, contact the place of purchase or the Goldair Customer Services Team.
Operating Your Heated Body Pillow Important instructions: Retain for future use. BEFORE FIRST USE: Before using your heated body pillow for the first time, it needs to be laid flat before switching on. CAUTION: Ensure the power cord is not tight because if pulled it may partially pull the plug from the socket.
Operating Your Heated Body Pillow Your Goldair Heated Body Pillow is equipped with a 3 heat controller. 3 HEAT CONTROL The control features a rotary switch to adjust the heat setting. 1. Low, Gentle Heat 2. Medium Heat 3. High Heat The control features an ON/OFF switch at the back of the controller and the pillow will be on the HIGH setting.
Page 7
Care and Cleaning of your Heated Body Pillow STORING YOUR BODY PILLOW Always allow the body pillow to cool before storing. When not in use, store in a blanket bag or the bag it was supplied in. Avoid creating sharp creases in the body pillow; for example do not store it under other items that may result in bending the element wires of the body pillow.
In non-domestic use Goldair limits the voluntary warranty to three months. Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period.
Page 12
New Zealand PO Box 100707, North Shore Mail Centre, Auckland, 0745 www.goldair.co.nz Australia PO Box 574, South Morang, Victoria, 3752 www.goldair.com.au...
Need help?
Do you have a question about the GHBP100 and is the answer not in the manual?
Questions and answers