Advertisement
Available languages
Available languages
Quick Links
TV Stand
Date of Purchase ___ / ___ / ___
Lot Number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Do Not Return This Product!
Contact our customer service team for help first.
WARNING
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
Easy
Assembly Difficulty Meter
You
Tube
Tough
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Ameriwood HOME 1870012COM
Summary of Contents for Ameriwood HOME 1870012COM
- Page 1 TV Stand Date of Purchase ___ / ___ / ___ Lot Number: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Do Not Return This Product! Contact our customer service team for help first. Easy Tough Assembly Difficulty Meter WARNING...
-
Page 2: Helpful Hints
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! Tube Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 1 HOUR - Open your item in the area you plan to keep it to avoid excessive heavy lifting. - Identify, sort and count the parts before attempting assembly. -
Page 3: Before You Start
Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. -
Page 4: Board Identification
Board Identification Not actual size Left Panel Right Panel Bottom Left Partition Right Partition Kick Apron Fixed Shelf 2 Adjustable shelves Left Side Kick Rear Support Right Side Kick 2 Door Assembly This piece is paperboard construction. Divider It is not made from wood, but is required for the Solid Back Panel assembly of your unit. - Page 5 Board Identification Not actual size This piece is paperboard construction. It is not made from wood, but is required for the assembly of your unit. Tube...
-
Page 6: Part List
Part List Actual Size (x18) (x56) (x16) (x18) (x3) (x3) #A22620 #A12210 #A53510 #A22610 #A22920 #A22910 cam lock 1/2" screw angle bracket cam bolt connector connector bolt (x12) (x36) (x2) (x8) (x14) #A21110 #A23030 #A17400 #A80250 #A21660 nail confirmat 7/8" bolt shelf support wood dowel Not Actual Size... - Page 7 STEP 1 Quick Assembly (x4) (x2) #A22620 #A21660 Proper orientation of CAM LOCK Tube...
- Page 8 STEP 2 (x6) #A22610 Finished Edge Tube...
- Page 9 STEP 3 (x1) (x2) (x2) (x1) (x2) #A22620 #A22610 #A12210 #A21660 #A30030 Quick Assembly SIDE A Proper orientation of CAM LOCK Finished Edge SIDE B Tube...
- Page 10 STEP 4 (x1) (x2) (x2) (x2) (x1) #A22620 #A22610 #A12210 #A21660 #A30030 Quick Assembly Proper orientation of CAM LOCK SIDE A Finished Edge SIDE B Tube...
- Page 11 STEP 5 Quick Assembly (x6) (x2) (x3) #A22620 #A22610 #A21660 Proper orientation of CAM LOCK Finished Edge Tube...
- Page 12 STEP 6 Finished Edge Tube...
- Page 13 STEP 7 Larger End Holes (x2) #A21660 Finished Surface Tube...
- Page 14 STEP 8 (x4) (x4) (x2) #A53510 #A12210 #A21660 End View Tube...
- Page 15 STEP 9 Tube...
- Page 16 STEP 10 (x6) (x12) #A22610 #A23030 Finished Edge Finished Edge Finished Edge Tube...
- Page 17 STEP 11 Tube...
- Page 18 STEP 12 Quick Assembly (x4) #A22620 Proper orientation of CAM LOCK Tube...
- Page 19 STEP 13 Note: Small end hole to front. * raw edges are shaded Tube...
- Page 20 STEP 14 (x6) (x6) (x1) #A53510 #A22910 #A12210 Tube...
- Page 21 STEP 15 (x2) (x3) (x1) #A22620 #A22920 #A21660 You will need to tap the connector (5) with a hammer to fully insert. Be sure the connector is positioned as shown before pushing into holes. Quick Assembly Proper orientation of CAM LOCK Tube...
- Page 22 STEP 16 (x6) (x6) (x2) #A53510 #A12210 #A22910 Tube...
- Page 23 STEP 17 Turn screw clockwise to lock. Tube...
- Page 24 STEP 18 (x8) #A12210 Carefully place the Kick (J), Rear Support (M) and Support (P) onto the Bottom (D) and attached the angle brackets (3) to the Bottom (D) with screws (4). Tube...
- Page 25 STEP 19 (x4) #A12210 Tube...
- Page 26 STEP 20 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. (x36) #A21110 Position the unit on its front as shown. Attached the back panel as shown nailing straight into the raw edges. Assure that the unit is square.
- Page 27 STEP 21 (x12) (x2) (x2) (x2) (x4) #A12210 #A17400 #A30030 #A52440 #A60010 Tube...
- Page 28 STEP 22 (x8) #A12210 Hinges are slotted for door adjustments. Loosen screws (4), make adjustments and re-tighten screws (4). Tube...
- Page 29 STEP 23 (x8) #A80250 Tube...
- Page 30 Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. (x1) #B64396 145 lbs 65.8 kg 25 lbs 11.3 kg This unit will take up to a 80" TV. (MAXIMUM) Certificate of Conformity 1.
- Page 31 Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You"...
- Page 32 Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte. Anclar el mueble a un poste de madera en la pared (si esto se requiere).
- Page 33 Español Página 15 Usted necesitará la ayuda de otra persona para este paso. Los soportes angulares (3) se a lo largo del borde superior. Página 17 Después de fijar la parte superior (c) a la unidad y bloquear los seguros de leva (1), fije el faldón (G) a la parte superior (c) con los tornillos (4).
- Page 34 Español Página 31 Registre su producto para recibir lo siguiente: * Detalles de nuevas tendencias - Vistazo a lo nuevo * Encuestas - alec su voz entre su comunidad * Códigos de ofertas y descuentos exclusivos * Fácil y rápido servicio de partes de remplace Clasificasión de 5 estrellas Visite el sitio web de su tienda local, califique su comprado y denos sus comentarios!
- Page 35 Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. ATTENTION Le meuble peut basculer et causer des blessures graves ou la mort.
- Page 36 Français Page 15 Vous aurez besoin de l'aide d'une autre personne pour cette étape. Les équerres (3) sont le long du bord supérieur. Page 17 Après avoir attaché le dessus (c) à l'appareil et verrouillé les verrous de came (1), fixez le tablier (G) au dessus (c) avec les vis (4).
- Page 37 Français Page 31 Enregistrez votre produit pour recevoir les éléments suivantes: * Détails sur les nouvelles tendances - un aperçu sur les nouveautés * Sondages - avoir une voix au sein de notre communauté * Offres exclusives et codes promo * Service de pièces de rechange rapide et facile 5 Étoiles Visitez le site Web de votre détaillant local, évaluez votre produit...
Need help?
Do you have a question about the 1870012COM and is the answer not in the manual?
Questions and answers