Advertisement
Quick Links
5.
Insert upper pipe into the lower pipe,
match back lines on two pipes together to be on rectangular,
and lock screw in back pipes to get installation done.
A.
Connect the pipe
C.
Connect the handshower,
Don't forget the gasket.
Insert upper parts to upper holder, lower parts two the two brass connectors,
then tighten the screws.
Then all installations are done.
COPYRIGHT © Nivito
www.nivito.com
B.
2,5mm 6-angle tool
Match the lines
info@nivito.com
Sweden
Instruction Manual
™
nivit o
Shower
craftshower
CR-1000
OFF
Head shower
Hand shower
HOT
COLD
OFF
COPYRIGHT © Nivito
www.nivito.com
410
60
info@nivito.com
Sweden
Advertisement
Summary of Contents for Nivito Craft CR-1000
- Page 1 Don’t forget the gasket. Head shower Hand shower Insert upper parts to upper holder, lower parts two the two brass connectors, then tighten the screws. Then all installations are done. COLD COPYRIGHT © Nivito www.nivito.com info@nivito.com Sweden COPYRIGHT © Nivito www.nivito.com info@nivito.com...
- Page 2 Fit the two brass connectors to the stainless fixing plate with two holes. Installation Then tighten the two brass connectors to the cold abd hot water pipes. Shower BEFORE USE We recommend that you hire a professional plumber. NOTE: During installation, the pipes until the mixers washed, before the mixer is mounted. NOTE: When attaching the connection tube (soft PEX tubing) to the supply line connecting link to be switched off.