Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Thought Technology Myonyx
- Page 2 Montréal, Quebec H4P 1L3 Canada +1 (514) 489-8251 mail@thoughttechnology.com MyOnyx System Product Name MyOnyx Device Name SA9020 Manual Number/ Revision Myonyx Firmware Update Instructions SA9037 (August 2022) © Thought Technology Ltd. 2022 Myonyx Firmware Update Instructions P a g e...
-
Page 3: Table Of Contents
Step 2: Pairing your device with your Windows PC ................5 Running the Update application ..................9 Step 1: Open the Myonyx Update Installer on your PC ................ 9 Step 2: Choose your Myonyx Device....................10 Step 3: Update your firmware ......................11 Step 4: Check your Myonyx device About Device Screen .............. -
Page 4: Introduction
Bluetooth pairing your device to your pc To update the firmware, MyOnyx device should be paired to a Windows PC first. Windows 10 or 11 PC is recommended. (There is slight difference between Windows 10 and 11 for Bluetooth pairing) -
Page 5: Step 2: Pairing Your Device With Your Windows Pc
In the Windows 11 PC, ‘Right Click’ on the Start button, choosing Settings, then click on Bluetooth & Devices in the settings window. Select Add Device from the top of your screen. Myonyx Firmware Update Instructions P a g e... - Page 6 • In the Add a device window click on Bluetooth. • After several seconds of searching, the MyOnyx device with its Serials Number will be shown. Myonyx Firmware Update Instructions P a g e...
- Page 7 • Select your MyOnyx device in the list, PINs are displayed on both the MyOnyx device screen and the PC. Make sure the two PINs are the same. Click on Connect on the PC and Press OK on the device.
- Page 8 You can also see the device in Other devices list on Windows 10. Figure 1: Your device will be on the "Other Devices" list (Windows 10 on the left, and Windows 11 on the right) Myonyx Firmware Update Instructions P a g e...
-
Page 9: Running The Update Application
• The battery level should be higher than 50% • We highly recommend you connect power adapter (charger) to MyOnyx and keep it connected until the end of the update process. • Please do not turn off the device during update. If for some reason the device is turned off it is still safe to turn it on and retry the update process. -
Page 10: Step 2: Choose Your Myonyx Device
Step 2: Choose your Myonyx Device • The updater application will list all paired MyOnyx devices, select your device which can be identified by the serial number • After several seconds, the application will show the device and current firmware information. -
Page 11: Step 3: Update Your Firmware
Click on Update. You will get a popup with information about going back to the home screen on the MyOnyx device and keeping the power adapter (charger) connected. Click OK on the message and the update will start. Your device will restart multiple times during the upgrade. -
Page 12: Step 4: Check Your Myonyx Device About Device Screen
Step 5: Apply the new device label • Be sure to apply the new label that you received in your upgrade package to the back of your Myonyx device. You can place it over the old label. Myonyx Firmware Update Instructions 12 |... -
Page 13: Step 6: Take A Picture & Send It To Us
How to Update your Myonyx Mobile App Automatic Update Updating your Myonyx Mobile App will install new functionalities such as MET and TENS electrostimulation programs. Updates are usually done automatically, and requires no steps for you to take. -
Page 14: Verifying The App Update
Verifying the App Update To be sure you are on the correct version of the Myonyx Mobile App, please visit the about screen: Step 1: Open the Myonyx Mobile App Step 2: Click the Settings Icon in the top right corner of your screen... - Page 15 The parameters for this program are listed in the following table: Program Total Reps STIM Rest time Ramp-up Ramp- Pulse Pulse Time time (sec) (sec) down Rate (Hz) Width (μs) (sec) (sec) (sec) Microcurrent 500,000 Myonyx Firmware Update Instructions 15 | P a g e...
- Page 16 500 ms (Fixed) 500 ms Delivery Continuous (Fixed) Continuous Pattern Continuous (Fixed) Continuous Ramp Up 0 (Fixed) 0 ms Ramp Down 0 (Fixed) 0 ms Session time 1-7200 s 300 s Myonyx Firmware Update Instructions 16 | P a g e...
Need help?
Do you have a question about the Myonyx and is the answer not in the manual?
Questions and answers