Advertisement
Sippi
Quick Guide
™
Starting Sippi
connecting a new patient
For continuous management of Sippi – see reverse.
1. Hang up Sippi on the bed.
3. Attach a new drainage
bag with cartridge to the
base unit.
4. Connect drainage bag
connector to catheter.
Note that Sippi will not register all
urine if the bladder drains quickly.
This initial volume in the bladder is
normally clinically irrelevant.
after
™
Observe Medical
Krokslätts Parkgata 4, 431 68 Mölndal, Sweden
+46 (0)10 - 641 02 02 | observemedical.com
2. Start Sippi.
261
ml
h
3907
158
ml
ml
5. To set the first hour – press
and hold the sync button for
at least 3 seconds.
261
ml
h
3907
158
ml
ml
Syncing only needs to be done
when starting a new patient.
Advertisement
Table of Contents
Summary of Contents for Observe Medical Sippi
- Page 1 Quick Guide ™ Starting Sippi after ™ connecting a new patient For continuous management of Sippi – see reverse. 1. Hang up Sippi on the bed. 2. Start Sippi. 3907 3. Attach a new drainage bag with cartridge to the base unit.
- Page 2 ™ – see reverse. Sippi keeps track of hours and measuring days. Normally the only handling necessary is reading the hourly diuresis and resetting from the previous measuring day. Reading hourly diuresis To start a new measuring day Read on Sippi’s display.
Need help?
Do you have a question about the Sippi and is the answer not in the manual?
Questions and answers