Summary of Contents for AOLIER MS-4001
- Page 1 （Kitchen Machinery）Multi-functional slicer MS-4001 Instruction Manual Keep this manual for future reference and pass it on with the equipment to any future users.
-
Page 3: General Safety Instructions
Technical Data Model: MS-4001 Rated voltage: AC120V 60Hz Power consumption: 160W General Safety Instructions Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions. -
Page 4: Children And Frail Individuals
Only original accessories can be used for the machine. When operating the machine, pay attention to the "special safety instruction slogan" of the fuselage Children and Frail Individuals In order to ensure the safety of children, please keep all packaging (plastic bags, boxes, Foam,Carton etc.) out of their reach. - Page 5 The company is not responsible for any damage caused by improper use or non-compliance with the safe use methods of this operation guide. f the power cord is damaged, it must be replaced by our manufacturer, maintenance ※ I agency or other professional maintenance personnel.
-
Page 6: Overview Of The Components
Overview of the Components Main Components Standard Accessories Power Switch Thickness adjustment board Main cover Thickness adjustment knob Blade Release button Knife removal knob feed table Power cord Thumb protector Feeding plate Pusher Right bracket Storage tray Left bracket... -
Page 7: Usage Instruction
Usage instruction 1. Place the machine on the platform and take out the power cord from the winding groove at the bottom of the machine. 2.Toggle the release button in the unlocking direction to turn on the machine. 3.Take out the tray from the bottom of the machine and place it at the discharge port. - Page 8 4.Clamp the feeding table into the slot of the feeding plate, and install the thumb protection plate and the pressing plate respectively. 5.Freely rotate the thickness adjustment knob left and right to adjust the cutting thickness (0-18mm) required by the food. 6.Place the food to be cut on the feeding table.
-
Page 9: Common Troubleshooting
completely cut into pieces. Note: a. Continuous working time: 15min, rest 10min. b. Frozen meat is allowed to be thawed for 25-30 Min. before using the machine. c. Conventional soft ingredients or ingredients with too much moisture should be frozen before slicing. - Page 10 Cleaning 1.Before cleaning remove the mains lead from the socket. 2.Remove the feed table, rinse and wipe dry with detergent. 3.Turn the knife knob to the right, take the knife disk out of the machine, rinse and wipe dry with detergent.
- Page 11 Disposal Do not dispose of the device in normal domestic waste Dispose of the device over a registered waste disposal firm or through your communal waste disposal facility. Observe the currently valid regulations. In case of doubt, consult your waste disposal facility. PACKING LIST : ...
- Page 12 Made in China...
Need help?
Do you have a question about the MS-4001 and is the answer not in the manual?
Questions and answers