Advertisement
STEP 1:
Screw the adjustable foot pads
into the 5-leg table base until
the base sits flat on the
ground.
STEP 4:
Attached the bottom mounting plate to
the bottom of the 5-leg table base and
center post using 1 of the supplied
Allen head long screws 2 .
STEP 2:
Place the chrome cap on the
center sections of the 5-leg
table base.
STEP 5:
Attached the table top mounting plate
to the end of the center post using 2 of
the supplied Allen head long screws 2
PG.2
STEP 3:
Slide the open end of the center post into the
footrest, and then slide the center post into the
5-leg table base.
STEP 6:
Lay the pub table top face down on a
clean, flat surface. Flip over the pub
table base/cener post and place it on
the back of the pub table top. Align the
holes and attach using 4 of the
supplied Allen head short screws 1 .
Advertisement
