Surface Mounted High Speed Hand Dryer Operating Instructions and Parts Manual (Automatic) Technical Specifications Item Category Performance Data Operating Voltage 220 - 240Vac, 50Hz, 200 - 800 WATTS Air Speed Output 75m/s, 85 m³/h Air Output Temperature Intelligent - based on room temperature Motor Type 18,000 rpm, 200 Watts, BLDC brushless DC motor Decibel Rating...
Surface Mounted High Speed Hand Dryer Operating Instructions and Parts Manual (Automatic) General Safety Information NOTE: Do not install dryer over wash basin. WARNING Type Y attachment This product is intended for installation by a qualified service person. Use AWAG No.16 solid If the power supply cord is damaged, it must be conductor for wiring.
Page 4
Surface Mounted High Speed Hand Dryer Operating Instructions and Parts Manual (Automatic) Installation Continued 2. Fix the hand dryer backplane to the wall using appropriate fixings for the wall type. • Before connecting to the main power install a secondary switch with a contact distance of > 3 mm. •...
Surface Mounted High Speed Hand Dryer Operating Instructions and Parts Manual (Automatic) Recommended Mounting Heights From floor to bottom of dryer. Men’s Ladies Children, ages 11-17 Children, ages 3-10 Disabled 43” 41” 39” 33” 35” 109 cm 104 cm 99 cm 84 cm 89 cm Intelligent Heating...
JetDryer or its authorised agents. Please note that the decision to repair or replace your machine is at the sole discretion of JetDryer. If any part is no longer available or out of manufacture, JetDryer will replace it with a functional replacement part.
Page 7
Surface Mounted High Speed Hand Dryer NOTES Operating Instructions and Parts Manual (Automatic) Diagram...
Page 8
FW3 LTD, Biodrier Unit 3, Woodlands Business Park, Burlescombe, Devon, EX16 7LL tel: +44(0)1823 672 970 • email: sales@biodrier.com...