Advertisement
Configuring Drying Settings
Configuring Drying Settings
1. Press the MENU key, and then use the arrow keys to select "Drying Settings" and press ENTER.
Use the arrow keys to select parameters and input desired values. Press ENTER to accept
2.
and confirm a setting.
Note: Connecting a PS2 keyboard to the analyzer allows for faster data input and configuration.
Saving drying settings
1. After configuring all settings, use option 8
(Settings storing) to select a desired
memory location (1 of 20).
2. Proceed to option 9 (Exist) and press the
Enter key. The analyzer will display "Save
Setting?"
3. Use the arrow navigation keys to select
"YES" and press the Enter key to confirm.
Quick Reference Guide
– ATS / BTS Moisture Analyzers
Advertisement
Table of Contents
Related Manuals for Torbal ATS
Summary of Contents for Torbal ATS
- Page 1 Quick Reference Guide – ATS / BTS Moisture Analyzers Configuring Drying Settings Configuring Drying Settings 1. Press the MENU key, and then use the arrow keys to select “Drying Settings” and press ENTER. Use the arrow keys to select parameters and input desired values. Press ENTER to accept and confirm a setting.
- Page 2 Quick Reference Guide – ATS / BTS Moisture Analyzers Preparing the Sample 1. A sample of a given substance must be a good representation of the material. Drawing and preparing a sample is a very important process as it may affect the repeatability of measurements. The most common method of homogenizing a sample is mixing.
Need help?
Do you have a question about the ATS and is the answer not in the manual?
Questions and answers