Advertisement
1
Specifications
Input Volt.
Current consumption
Tx LED Element
Beam Spreading angle
Contact Capacity
Response Time
Delay Time of Relay
Sensing Range
LED Indicators:
Red LED Off: Beam aligned / Red LED On: Beam broken
Red LED flash: Beam alignment signal weak (Re-align)
Green LED on: Beam aligned proper
Additional Function
Wiring Connection
IP
Environment/Storage Temp -13˚F to 140˚F / -31˚F to 176˚F
Dimension
Cable wires
Approvals
NOTE:
MONITOR functions of UL325
(01) End of Line Resistor (10K )
(02) N.C. contact (Optional)
Depending on the monitoring system used by the gate motor,
it may be necessary to use either the N.C. output or connect
the included 10K resistor to the N.O. or N.C. output.
Please refer to the gate operator manual or the gate operator
manufacturer for the preferred monitoring method.
12-30 VDC/AC 60 Hz (Non Polarity)
100 mA
Infrared LED/Wave length 740 nm
5˚
30VDC/AC, 0.5A
10 msec
10 msec
10 meters
Tamper switches
Terminal block / Cable gland (IP-55)
IP-55
122 (L) x 61 (W) x 62 (D) mm
2517 / 24AWG / 5~7 cores
UL325-2016 & CE
Advertisement
