Related Manuals for Dato DTK801
Summary of Contents for Dato DTK801
- Page 1 GLOW PLUG ANALYSER DTK801 QUICK START GUIDE For more details visit www.datotech.de...
- Page 2 Description CALIBRATION It is advisable to calibrate the DTK801 before using. Use the red test probe to touch the black alligator clip before powering on. Power on the unit by pressing and releasing the Glow Plug button. For more details visit www.datotech.de...
- Page 3 Press to power on. Long press the button while the boot-up screen is still on until reaching the end of the Auto- zero countdowns. For more details visit www.datotech.de...
- Page 4 Touch the “positive” end of the glow plug with the tip of the red test probe. The DTK801 will take a reading every few seconds and the results are displayed on the LCD as follow: LCD Display Perimeters...
- Page 5 INTERNAL BATTERY Use AAA batteries (X2). AUTO SWITCH OFF Auto switch off if the tool is not being used, to conserve battery life. TORCH LIGHT To light-up dim surroundings for finding the glow plug or other car electrical problem. FRIENDLY ADVICE Clean threads of all rust, dirt, oil or paint with solvent and a rag.
Need help?
Do you have a question about the DTK801 and is the answer not in the manual?
Questions and answers