Hunter Pacific IMCP2 User Manual

HANDSET BUTTON EXPLANATION

To turn fan on press the "Fan On/Off" button and the fan will start and settle on the speed it was
last used.
The six LED lights on the remote control display the fans current speed. Low speed is indicated
by the 1st LED on the left of the handset. High speed is shown by the 6th LED.
Use "FWD/REV" anytime to change direction. Depending on speed it may take a little while for
the fan to stop and change direction.
The "Fan Timer" function turns the fan off after the preset time has elapsed. To cancel timer
function turn the fan off.
1. Any modification or attempt to directly wire the fan without a control module will void warranty
unless those modifications are authorised.
2. DO NOT USE ELECTRONIC OR DIMMER TYPE SPEED CONTROLLERS.
®
User Manual
Fan On/Off Button
Fan Speed Button
Forward/Reverse Button
Fan Timer Button
Learning Button