IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 1. Read all instructions. 8. The use of accessory attachments not recommended by the 2.
Page 3
Other Consumer Safety Information This product is intended for household use only. The length of the cord used on this appliance was selected to reduce the hazards of becoming tangled in or tripping over a longer cord. If a longer cord is necessary, an approved extension cord may be used.
Parts and Features Burn Hazard. Do not overfill Kettle. Boiling water may w CAUTION spit out of the spout. CLOSE Push Pad (on Lid) Removable Anti-Scale Mesh Filter OPEN Button (inside spout) Control Panel/Display Water Level Window Control Panel/ Display Power Base...
How to Use the BEFORE FIRST USE: Flip open lid and fill Kettle with water to the MAX fill line on the Water Level Window. Press ON/Standby button to turn the Kettle ON. The Kettle will bring the water to a boil, then shut off automatically. Discard Kettle water and repeat 2–3 times, rinsing out the kettle each time.
Page 6
How to Use the Kettle (cont.) NOTE: The initial default actual time 0:00 is flashing, and the You should: • Unplug, and wait about 20 minutes for the element to cool. default starting time is 19:99. The programming function cannot be activated in the initial default state, so it needs to be activated •...
Page 7
How to Use the Kettle (cont.) To replace filter, line up the filter with tab towards the inside of the Kettle and slide into place until it snaps into place. Tea Guide • Bring filtered or good-tasting tap water to a boil in the Kettle. Use 6 ounces (177 ml) of water per cup of tea.
Care and Cleaning WARNING Electrical Shock Hazard. Do not immerse Kettle, Power Base, or plug in water or any other liquid. 1. With Kettle unplugged, empty any remaining water and rinse. Allow Kettle to cool. The Mesh Filter may be Honey 60°C 3-4 minutes...