Do you have a question about the DOUBLE HAMMOCK KIT and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for TWO TREES DOUBLE HAMMOCK KIT
Page 1
When installing always check with a qualified builder for safety. Two Trees will only guarantee the performance of this product when used with other Two Trees products. i.e. if non...
Page 2
Thank you for purchasing a Two Trees hammock. We at Two Trees know the importance of spending time relaxing. Hence we’ve developed a range of quality hammocks and convenient accessories that come with easy to follow instructions so that you will be relaxing in no time.
Page 3
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS SELECTING THE LOCATION There are many ways to hang your hammock, here are some of our favourite and recommended options: BETWEEN BETWEEN TREES TWO POSTS BETWEEN ON HAMMOCK TWO WALLS FRAME...
Page 4
THINGS TO CONSIDER THINGS TO CONSIDER WARNING: Read instructions before use and keep for future reference. Failure to read these instructions before use can lead to an increased risk of injury. When installing always check with a qualifi ed builder for safety. DO NOT twist or knot suspension cords when Hammocks will stretch by 5-10% after the fi rst few hanging.
Page 5
20-30cm above the ground. TEMPORARY INSTALLATIONS For temporary installations, such as trees or beams, we recommend using the Two Trees hammock hanging kit (TT501HK). For more information about our installation products please visit our website (www.twotreeshammocks.com.au)
Page 6
Machine wash with cold water on a regular cycle using non-bleach detergent. DO NOT tumble dry. DO NOT iron. Dry in shade. STORING YOUR HAMMOCK When storing your Two Trees hammock make sure hammock is clean and completely dry. To prevent tangles place a knot in each suspension cord. Fold the hammock in half, with suspension cords together.
Page 7
DOUBLE HAMMOCK KIT DOUBLE HAMMOCK KIT FRAME PARTS FRAME PARTS LIST OF PARTS A Metal arm pipe with fi xed screws, 42mm DIA x 1060mm B End angle tube C Center base spreader tube, 36mm DIA x 540mm D Metal stand pipe, 40mm DIA x 985mm...
Page 8
HAMMOCK FRAME HAMMOCK FRAME ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS a. Place F (plastic inside collars) in either side of a. Insert G (plastic external collars) on straight end the small brace tube of B (end angle tube). of either side of B (end angle tube). b.
Need help?
Do you have a question about the DOUBLE HAMMOCK KIT and is the answer not in the manual?
Questions and answers