Iot real-time body temperature measurement wristband tag (14 pages)
Summary of Contents for JAVS X7-DAC Femto
Page 1
X7 DAC Femto wonderfully combines digital and analogue circuit and focuses its balance. The device contributes the most stunning sound you have ever experienced. Especially, with history of more than 10 years, device equipped technology from JAVS brings harmonious sound that cannot be seen in this price range.
Page 2
Features Features on the front of X7-DAC Femto ❶ Input Selector: Select Input source USB: PCM 24BIT / 384kHz / DSD 256, When input source is PC or smartphones OPT: PCM 24BIT / 192kHz, Optical COAX: PCM 24BIT / 192kHz, Coaxial...
Page 3
MQA Studio O: Blue The X7-DAC Femto’s LED glows green or blue to indicate that the unit is decoding and playing an MQA stream or file, and denotes provenance to ensure that the sound is identical to that of the source material. It glows blue to indicate it is playing an MQA Studio file, which has either been approved in the studio by the artist/producer or has been verified by the copyright owner.
Page 4
OFF: Power off. ❽ Volume Volume control(Only available when switch on the back is selected as Var). Features on the back of X7-DAC Femto ❶ Balanced Output Bypassing volume circuit, full range balanced output coming out using XLR jack. ❷ Unbalanced Output...
Page 5
❸ AES/EBU Input AES/EBU input(up to 192kHz). ❹ I S(HDMI) Input Connect to X7-DAC Femto using HDMI cable. Supports up to PCM 384 & Native DSD256. ❺ COAX Input Coaxial input(up to 192kHz). ❻ Optical Input Optical input(up to 192kHz).
Page 6
And, using USB (A to B) cable, connect PC and the device to #7 on the back panel. Connect output to #1,2 on the back or #4,6 on the front. Turn on the power of PC & the device and visit www.javs.co.kr to download the latest firmware (for Windows).
Page 7
DAC Femto via HDMI cable. Using this port, it is possible to receive PCM 384 or DSD sources which can not be done on SPDIF or AES/EBU. Connect JLINK III output port on the back of X7-DDC and input port of X7-DAC Femto using HDMI cable.
Volume is fixed at the maximum level on Fix mode. When Var is selected, adjusting volume is possible by using volume knob on the front (#8 on the front). What’s in the box 1 x X7-DAC Femto 1 x micro USB Cable 1 x USB A to USB B Cable...