EmberGlow VFS25NL Owner's Operation page 10

Vent-free gas stove
Table of Contents

Advertisement

Available languages

Available languages

For changing from propane to
natural gas supply:
1. Remove 2 screws from gas selector cover
plate. Remove to expose fuel selector
device.
2. For NATURAL GAS, press in knob using
a flat screwdriver with a blade with thick-
ness of a quarter and turn knob clockwise
until the knob locks into the NG po-
sition (see Figure 7). Fuel selection device
must be locked in the NG position. Do not
operate heater between locked positions!
3. Replace cover over fuel selection device
and reinstall screws.
4. Remove hex plug (with wrench provided)
from natural gas inlet of regulator and
discard (see Figure 7). Install gas line into
NG inlet of regulator. Use thread sealant
to assure there are no leaks.
Back of Stove
Gas Select
Selector de gas
LP
NG
Fuel Selector
Knob
Gas Select
Selector de gas
Figure 7 - Settings for Natural Gas
NG
LP
Selection
10
INSTALLATION
INLET GAS PRESSURE
MAX 1/2 PSIG (3.5KPa)
LP
NG
Gas Inlet
Gas esté
Gas
Hex Plug
Connection
Fitting
INLET GAS PRESSURE
MAX 1/2 PSIG (3.5KPa)
LP
NG
Gas Inlet
Gas esté
www.sureheat.com
For changing from natural gas
supply to propane supply:
1. Remove 2 screws from gas selector cover
plate. Remove to expose fuel selector
device
2. For PROPANE GAS, press in knob using a
flat screwdriver with a blade the thickness
of a quarter and turn knob counterclock-
wise
until the knob locks into the
LP position (see Figure 8). Fuel selection
device must be locked in the LP position.
Do not operate heater between locked
positions.
3. Replace cover over fuel selection device
and reinstall screws.
4. Remove hex plug (with wrench provided)
from propane/LP gas inlet of regulator
(see Figure 8). Install hex plug into NG
inlet of regulator. Install gas line into LP
Gas Select
Selector de gas
inlet of regulator. Use thread sealant to
assure there are no leaks.
NG
LP
Back of Stove
Gas Select
Selector de gas
NG
LP
Fuel
Gas Connection
Selector
Fitting
Knob
Figure 8 - Settings for Propane/LP Gas
Selection
INLET GAS PRESSURE
MAX 1/2 PSIG (3.5KPa)
NG
LP
Gas Inlet
Gas esté
INLET GAS PRESSURE
MAX 1/2 PSIG (3.5KPa)
LP
NG
Gas Inlet
Gas esté
Hex Plug
200085-01A

Advertisement

Chapters

Table of Contents
loading

Table of Contents