BEST BUY essentials BE-HCL312 Quick Setup Manual

RCA to Coax RF
Modulator
Quick Setup Guide
BE-HCL312
Before using your new product, please read these instructions to prevent any damage.
Package contents
• RF Modulator
• Power adapter
• Quick Setup Guide
Required parts (not included)
• One composite AV cable with three RCA
connectors (yellow, red, and white) at each end
• One 75-ohm coaxial cable
Features
ANT IN
VIDEO IN
DC IN
AUDIO IN
Connecting your RF Modulator
1 Connect a composite AV cable (not included) from
the AV output jacks (yellow for video; red and
white for stereo audio) of the source component
(for example, a Blu-ray/DVD player or a gaming
system) to the corresponding color-coded input
jacks on the RF Modulator.
Note: For mono AV components, use only the yellow and
white connectors of the composite AV cable.
OR
T0 TV
Game console
CH 3/4
RCA Source
3 Connect the power adapter to the DC IN jack on
the RF Modulator, then plug it into a standard
120V AC outlet.
Composite (AV)
cable
DVD/Blu-ray player
2 Connect the coaxial cable to the TV using one of
the following methods that matches your setup:
• If you have an RF TV source, such as a
cable/satellite box or TV antenna, connected to
the TV, disconnect that component from the TV
and connect the coaxial cable to the ANT IN
jack on the RF Modulator.
Connect a separate coaxial cable from the TO
TV jack on the RF Modulator to the RF input jack
on the TV.
• If you do not have an RF TV source, connect a
coaxial cable from the TO TV jack on the
RF Modulator to the RF input jack on the TV.
Note: If your TV has only 300-ohm VHF screw
terminals, use a 75-ohm-to-300-ohm matching
transformer to complete the connection.
Coaxial cable
(with F connector)
RF modulator
HD TV
From TV antenna
OR
From cable/satellite box
RF Source