Table of Contents
Advertisement
Quick Links
Electric Chain Saw
Operator's manual
WARNING:
Read carefully and understand all INSTRUCTIONS before operating. Failure to follow
the safety rules and other basic safety precautions may result in serious
personal injury.
Save these instructions in a safe place and on hand so that they can be read when
required. Keep these instructions to assist in future servicing.
REV 1.0
Advertisement
Table of Contents
Summary of Contents for Super Handy GUT118
- Page 1 Electric Chain Saw Operator’s manual WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Save these instructions in a safe place and on hand so that they can be read when required.
-
Page 2: Safety Symbols
When using equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating manual with due care. Keep this manual in a safe place, so that the information is always available. If you give the equipment to any other person, give them these operating instructions as well. - Page 3 TECHNICAL SPECIFICATIONS Model GUT118 Voltage 120 V~60 HZ Amps 15 A Output power 1800 W Bar length 18 inches (455mm) Chain speed 43 ft./s (13m/s) Oil tank capacity 6.4 oz. (190ml) Chain pitch 3/8 inch (9.68mm) Number of chain links...
-
Page 4: Use For Intended Purpose
Electrical Tools – General Safety Guidelines These guidelines are intended as general guidance for all electrical power tools, other advice specific to the supplied power tool is contained in the relevant section of this manual. Failure to adhere to the following may result in electric shock or serious injury. •... -
Page 5: Specific Safety Instructions
Specific Safety Instructions In addition to the general safety guidance supplied, the following instructions are specific to this machine and must also be adhered to. • When working with the chain saw the following safety equipment is vital to protect you. - Protective gloves - Suitable footwear - Leg protectors... - Page 6 Such dangerous kickbacks can largely be avoided by working quietly and with forethought in the following manner: • While sawing, always watch the guide-bar nose • Never attempt to cut with the nose of the guide bar. • Take care when cutting thin and springy branches. Fig.1 •...
-
Page 7: Re-Tensioning The Saw Chain
Re-tensioning the saw chain When working with the chain saw, the chain may expand as a result of heat. It then becomes slack and may slip off the guide bar. It is necessary in this situation to re-tension the chain. Once finished working it is important to release the tension before the chain cools down. -
Page 8: Troubleshooting
Troubleshooting Problem Cause Remedy Motor does not run. No electricity Check socket, cable and plug. Chain brake See section “chain brake” and “Releasing the chain brake” Running out of carbon brush Change the carbon brush Chain does not move. Chain brake Check the chain brake, release if necessary. - Page 9 Great Circle USA Support Line: 1-866-493-0524 help@greatcircleus.com www.greatcircleus.com Size: 145x210mm 157克铜版纸 REV 01/10/22...
Need help?
Do you have a question about the GUT118 and is the answer not in the manual?
Questions and answers