Page 1
Technical parameters Installation manual number of × holes FLAT BASIC 51,5 154,5 222,5 × × number of × holes FLAT M 51,5 154,5 222,5 × × number of × × holes × FLAT L × × number of × ×...
Page 2
Take the jig saw and cut the holes For FLAT PLUS sharp corners are needed Insert the frame and tighten the screws Length of a screw for FLAT's installation to a table desk LENGTH OF A SCREW M4 ISO 7380 A2 DESK MOUNTING 10–14 15–19 20–24...
Page 3
to assemble Clip the plastic fastener pullout on the cable to the metal head Firstly pass a cable through a metal piece Put the plastic piece on the second one so that the cable gets in the middle Insert the plastic pieces into the metal head Put the cable into Follow direction of arrow no.
Page 4
Put the bag on the cable with weight Place the bag on the metal head. The are tunnels on the bag that should be passed through the metal head and hooked. More details: FLAT...