Linksys WVC11B Quick Installation page 2

J
Enter your wireless network's
SSID or network name. If you
chose Ad-Hoc mode, select
the channel at which the net-
work broadcasts its wireless sig-
nal. Then click Next.
K
J
The Security Settings screen will
appear. If your network has
WEP encryption enabled, then
select the level of WEP encryp-
tion and enter a Passphrase. If
you do not have a Passphrase
and want to manually enter a
WEP key, leave the Passphrase
field blank. If your network has
K
WEP encryption disabled, keep
the default, Disabled.
Then click Next.
L
If you entered a Passphrase,
you will see the automatically
generated WEP key. Otherwise,
manually enter the WEP key in
L
the Key 1 field. Click Next.
M
Review your settings before the
Setup Wizard starts to copy your
files. Click Save.
M
Model No.
N
After the files have been suc-
cessfully copied, the Congrat-
ulations screen will appear.
Click the Install Viewer &
Recorder Utility button to install
the Camera's Utility on your PC.
N
This Utility provides a conve-
nient way to view and record
the Camera's video.
Install the Viewer & Recorder
3
Utility
A
After you clicked the Install
Viewer & Recorder Utility button,
the Welcome screen will
appear. Click Next.
B
The Choose Destination Loca-
tion screen will appear. To
A
install the Viewer & Recorder
Utility files in the default folder,
click Next. To select a different
folder, click Browse and follow
the on-screen directions.
C
To add program icons to the
default folder, click Next. To
add program icons to an exist-
B
ing folder, select one from the
Existing Folders listed, and then
click Next.
D
When you see the screen
shown in Figure D, click OK.
E
When the setup is complete,
click OK.
C
F
To open the Viewer & Recorder
Utility, double-click its shortcut
D
on your desktop.
NOTE: On the Congratulations screen of
E
the Setup Wizard, you can click the
Setup SoloLink DDNS Service button
to take advantage of the Camera's
Dynamic Domain Name System (DDNS)
feature. This is useful for remote access
of the Camera via the Internet. Refer to
the SoloLink Quick Installation for more
information.
Connect the Camera for
4
Wireless Network Use
A
Unplug the power adapter
from the electrical outlet.
B
Unplug the Ethernet network
cable from the Camera as well
as the PC, router, or switch.
C
Place the Camera in the loca-
tion you want.
D
Plug the power adapter into a
local electrical outlet.
The Ready LED flashes while the
Camera is initializing. When the
Ready and Wireless LEDs are
solidly lit, the Camera is ready
for use.
For additional information or troubleshooting
E
Aim and focus the Camera
help, refer to the User Guide on the Setup CD-
ROM. You can also call or e-mail for further
accordingly.
support.
Congratulations! The installation of
24-hour Technical Support
the Wireless-B Internet Video
800-326-7114
Camera is complete.
(toll-free from US or Canada)
E-mail Support
support@linksys.com
Website
http://www.linksys.com or
To view video using a web
NOTE:
browser, you must use Internet Explorer
RMA (Return Merchandise Authorization)
version 5.5 or higher. The View Video
FTP Site
feature will not work with Netscape.
Netscape users should use the Viewer
Sales Information
& Recorder Utility instead.
800-546-5797 (800-LINKSYS)
F
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2003
Cisco Systems, Inc. All rights reserved.
WVC11B-QI-30903C JL
http://support.linksys.com
http://www.linksys.com/support
ftp://ftp.linksys.com