Advertisement
□□□□□□□□□□□□□□□□□□□□
□□□□□□□□□□□□□□□□□□□□
Thank you for purchasing the Iijima Opener "model KO-X1".
The opener KO-X1 is a hole opening tool designed mainly for plastic caps used on
plastic bottles. Refrain from using this tool to open holes in other caps made of hard
materials, etc., as there is a risk of faults. Do not apply force with other tools when
opening holes. Doing so could result in faults.
Always read and fully understand this manual before starting to ensure correct and
safe use. Keep this manual near the tool for quick reference at any time.
Opener / KO-X1
Operation Manual
KOX1TS -0210
Advertisement
Table of Contents
Summary of Contents for Iijima KO-X1
- Page 1 Thank you for purchasing the Iijima Opener “model KO-X1”. The opener KO-X1 is a hole opening tool designed mainly for plastic caps used on plastic bottles. Refrain from using this tool to open holes in other caps made of hard materials, etc., as there is a risk of faults.
- Page 2 1. Confirmation of Package Contents When unpacking the KO-X1 Opener, confirm that the following items are included and that the contents have not been damaged. If any parts are missing or damaged, contact the dealer which you purchased the product.
- Page 3 Proper measurements may not be possible if these parts are removed. Step 2. Attach the needle dedicated for the KO-X1. Take care not to stab the human body with the needle. There is a risk of blindness, puncture wounds, or cuts.
- Page 4 For details, refer to the measurement methods described in the operation manual enclosed with the oxygen meter. • If there is less than 10mL of sample gas, or if the sample cannot be used the KO-X1 because of the shapes and materials, measure with the Gas Sampling Glass Tube (model: GS-2) option (sold separately).
Need help?
Do you have a question about the KO-X1 and is the answer not in the manual?
Questions and answers