Summary of Contents for FVC PM0302B
- Page 1 Installation Guide Promaster DIY Bed Brackets PM0302B FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576...
- Page 2 All Flatline Van Co products must be properly assembled and secured before attaching to your vehicle. Improper attachment could result in an automobile accident, and could cause serious bodily injury or death to you or to others involved. You are responsible for assembling and securing Flatline Van Co products to your vehicle, checking the mounting points and attachments prior to use, and regularly inspecting the products for wear and or damage.
- Page 3 THANK YOU! ARE YOU EXCITED ABOUT YOUR NEW BED SYSTEM? HERE ARE A FEW THINGS TO DO TOOLS BEFORE BEGINNING THE INSTALLATION PROCESS-- • PLEASE INSPECT THE PRODUCT TO ENSURE THERE WAS NO DAMAGE INCURRED DURING SHIPPING. • IF THERE IS DAMAGE TO REPORT, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT AS SOON AS POSSIBLE.
-
Page 4: Package Contents
PACKAGE CONTENTS BED BRACKET QTY - 4 FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576... - Page 5 HARDWARE 1/4 SELF DRILLING SCREW 1/4 SCREW X 0.09375 SPACER 1/4-20 X 1 FLANGED HEX HEAD 1/4 SCREW X 1 O.D. OVERSIZED SCREW FLAT WASHER QTY - 8 QTY - 16 QTY - 8 QTY - 8 FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576...
-
Page 6: Let's Get Started
LET’S GET STARTED! FIRST STEP IS TO MEASURE AND MARK THE LOCATIONS FOR OUR BRACKETS FIGURE 1 TO GO INSIDE THE VAN. YOU WANT TO MEASURE FROM THE REAR EDGE OF THE SHEET METAL ON THE WALL AS SHOWN IN FIGURE 1. PLACE A MARK ON THE “WINDOW LEDGE”... - Page 7 FIGURE 4 NEXT, GRAB YOUR FIRST BRACKET AND SET IT ON THE LEDGE. YOU WANT TO ENSURE THE BRACKET FACE RESTS FLUSH WITH THE WALL STRUCTURE. LINE IT UP WITH YOUR FIRST MARK AT 4.5” AS SHOWN IN FIGURE 4 AND DRIVE IN THE FIRST 1/4 SELF DRILLING SCREW.
- Page 8 FIGURE 4 THE BRACKET SHOULD STAND STRAIGHT ON IT’S OWN DUE TO IT’S DESIGN, BUT VERIFY THAT IT IS STANDING STRAIGHT AND DRIVE THE REST OF THE 1/4 SELF DRILLING SCREWS IN. REPEAT STEPS FOR THE REMAINING 3 BRACKETS, REMEMBERING THAT IT IS THE BACK SIDE (CLOSEST TO REAR OF VAN) THAT IS ALIGNED WITH THE MARKS YOU MADE .
- Page 9 IF YOU ARE INSTALLING YOUR BED SYSTEM WITHOUT USING L-TRACK, THE DIAGRAM BELOW SHOWS THE ASSEMBLY ORDER OF THE FASTENERS TO ATTACH THE BED RAIL TO THE DIY BED BRACKETS. THE INCLUDED SPACER IS TO ASSIST IN PROPER ALIGNMENT AND SAVE THE THREADS OF THE SCREWS FROM DAMAGE.
- Page 10 FIGURE 6 THE HOLE SPACING ON THE BED BRACKETS IS SPACED TO ACCOMMODATE 2” ADJUSTMENTS IN HEIGHT. THIS SPACING ALSO ALLOWS THE MOUNTING OF L-TRACK. HARDWARE IS NOT PROVIDED, AND L-TRACK MUST BE PURCHASED SEPARATELY. WE SUGGEST USING A 1/4-20 X 1” FLATHEAD SCREW TO SECURE L-TRACK TO OUR BED BRACKETS.
- Page 11 PLEASE SEE OUR GUIDE FOR THE PROMASTER BED SYSTEM TO COMPLETE THE INSTALLATION! THERE WILL BE MORE DETAILS REGARDING THE BED INSTALL AND ADJUSTMENT. WE ALSO HAVE AN INSTALLATION VIDEO AVAILABLE ON OUR WEBSITE. FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576...
- Page 12 CUSTOMER SUPPORT If you are having any issues with your product, please reach out, and we will make it right. FVC is a company of van and outdoor enthusiasts that design and use our own products, so we want you to be as stoked on your new parts as we are! @flatlinevanco...
Need help?
Do you have a question about the PM0302B and is the answer not in the manual?
Questions and answers