UNICOM PLA Quick Start Manual

Wall Arms – PLA & PLS – SSV & SRV
Screen Size: 33-57"
*Please check model specific details before installing*
Screen Size: 15-32"
*Please check model specific details before installing*
Please carefully inspect the product before assembling. If you notice any apparent damage, call your carrier
claims agent and do not continue the installation until it has been reviewed. Please watch for pinch points.
Do not put your fingers between moveable parts. Do not tamper with or disassemble any spring loaded
parts. Before installing, make sure that the supporting surface will support five times the combined load of
the solution and the hardware. Never exceed the maximum load capacity. Please also layout all components
to ensure that you have all of the required parts before proceeding (see BOM list on following page). Use of
this product for anything other than its specified use may result in failure or personal injury. This product is
intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant
or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
PLA1X1
Guide Max. Weight: 30kg
SSV
Guide Max. Weight: 20kg

WARNING

01865 767676
sales@unicol.com
www.unicol.com
Revised 24/02/22
PLS1X1
SRV