Download Print this page

Outsider Street 1250 Mounting Manual

Advertisement

Quick Links

PLATEAU STREET
19-09-2022
#207 MOUNTING GUIDE
Kigkurren 8A Islands Brygge DK-2300 Copenhagen · out-sider.dk
01

Advertisement

loading
Need help?

Need help?

Do you have a question about the Street 1250 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Outsider Street 1250

  • Page 1 PLATEAU STREET 19-09-2022 #207 MOUNTING GUIDE Kigkurren 8A Islands Brygge DK-2300 Copenhagen · out-sider.dk...
  • Page 2 2x Short leg with flange (207 9012) Fixation of Point Sun..............05 Cleaning and maintenance .............06 ADD-ONS ITEM LIST Add-ons, are not included with standard product Street 1250/1800 1x Point Sun #326 f. Seat • 3 pcs M8x90 • 3 pcs M8 nut •...
  • Page 3 19-09-2022 ASSEMBLING LEGS AND TABLE A: Place the table on a soft surface bottom up. Screw on the two legs (207 9231) with the included M8x16 countersunk screws, two for each leg. B: Flip the table and insert the disc with a logo into the hole in the tabletop. Make sure the disc is flat and flush with the surface. Use the M8x90, washers, and M8 nut to fasten the disc to the frame.
  • Page 4 19-09-2022 ASSEMBLING LAMINATE SEATS TO LEGS Place the seats on a soft surface bottom up. Screw the small leg (207 9012) on the opposite end of the first leg with the included M8x16 countersunk screws, two for each leg. Repeat the procedure with the other seat and leg.
  • Page 5 19-09-2022 ASSEMBLING SEATS TO TABLE FRAME Place the two seats on the legs attached to the table and screw them on with the included M8x16 countersunk screws, two for each leg. Then insert the two discs without logos into the holes in the seats.
  • Page 6 19-09-2022 MOUNTING OF POINT SUN Place the Point Sun light unit in the base, align the holes and tighten the safety set screw. Then place the whole unit in the hole and use the M8x90 bolt to fix it to the metal frame underneath. Use the M8x30 to fixate it from the side, do not overtighten.
  • Page 7 19-09-2022 CLEANING Clean the laminate surface with warm water and a soft sponge. NEVER use the abrasive “green” side of the sponge. Use an ordinary universal cleaner. Difficult dirt must be removed with a nano sponge and water. Please take a closer look at our website, or contact us for information.

This manual is also suitable for:

Street 1800