Page 2
Toll: 1.800.268.7927 www.medelco.ca Welcome Thank you for choosing OmniPlinth Treatment Tables. We are confident you will enjoy your therapy table for years to come. Great pride and craftsmanship is built into each table, resulting in a quality product for you.
Page 3
• Employers who operate these appliances must ensure adequate training is given to operators and employees on how the appliance works, load limits, and all designer or manufacturer built-in safety features. MEDELCO • Toll Free: 1.800.268.7927 • web: www.medelco.ca • email: sales@medelco.ca...
Page 4
CAUTION • Read, understand and practice the precautionary and operating instructions found in this manual. Know the limitations and hazards associated with using any OmniPlinth Electric High-Low Treatment Table. • When making adjustments to the table sections support the table section (s) until the locking mechanism is engaged.
Page 5
Model Shown: Three section table with casters & foot bar elevation control 1……Head rest 2……Head rest release handle 3……Casters 4……Frame Leveller 5……Easy-step brackets for casters 6……Motor 7……Leg section release handle 8……Leg section 9……Foot bar elevation control MEDELCO • Toll Free: 1.800.268.7927 • web: www.medelco.ca • email: sales@medelco.ca...
Page 6
Down. If operation is opposite to the markings, move the air hose to the other nipple on the foot pedal, and try again. Operation should now correspond to the markings. MEDELCO • Toll Free: 1.800.268.7927 • web: www.medelco.ca • email: sales@medelco.ca...
Page 7
With the help of the gas-springs, lift the sections into the desired position. Tighten both handles to secure the sections. Black Locking Levers MEDELCO • Toll Free: 1.800.268.7927 • web: www.medelco.ca • email: sales@medelco.ca...
Page 8
The Naugahyde upholstery on your table should be cleaned between patients with an approved Naugahyde cleaner. Do not use abrasive cleaners or pine-based solutions on the upholstery. Medelco offers the following approved Naugahyde cleaners which can be found on our website at www.medelco.ca : •...
Need help?
Do you have a question about the OmniPlinth and is the answer not in the manual?
Questions and answers