Bluetooth Audio; Automatic Connection After Pairing Has Already Taken Place; Pair Another Terminal Device; Interrupting The Bluetooth Connection - Kenwood M-525DAB Operating Instructions Manual

Repeat <REPEAT>:
Press once: Repeat track / press twice: Repeat ALB
Press thrice: Repeat All / press four times: Off
Random playback <SHUFFLE>:
Press once: Random playback On / press twice: Random playback Off

9. BLUETOOTH audio

The BLUETOOTH function enables the wireless transmission of music files (audio streaming) to the
radio. Smartphones, tablets or similar devices can be paired. To do this please use the <MODE> key
on the remote control or the device to switch to source "BT".
9.1 Pairing BLUETOOTH devices for the first time (pairing)
Make sure that the terminal device to be paired is switched on and BLUETOOTH is activated. The
"Not connected" appears in the Display. Now open the BLUETOOTH settings on the terminal device
to be paired and start searching for available BLUETOOTH devices there. Select "M-525DAB" and
start the pairing process. After successful pairing, "Connected" appears on the display. Now the
music playback can be controlled via the terminal. To do this, use the music App of your choice.
Basic operation of play/pause and skip forward/backward is possible using the corresponding buttons
on the remote control.
Note: Some terminal devices require a PIN code when connecting, then enter "0000".

9.2 Automatic connection after pairing has already taken place

If switched from source "BT" or when the radio is switched off, the BLUETOOTH connection is dis-
connected. The radio is switched on again or switched to source "BT"

9.3 Pair another terminal device

To pair another device with the radio, please press and hold the <BT PAIR> key. This will disconnect
the current connection. Now proceed as when you first connect a terminal device.

9.4 Interrupting the BLUETOOTH connection

If you want to interrupt the connection to a paired device, please press and hold the <BT PAIR>
button on the remote control. The radio then switches back to pairing mode.

10. Line-In

External devices such as MP3 players, DVD players or game consoles can be connected to the line-in
connection to play music. To do this please use the <MODE> key on the remote control or the device
to switch to source "Line-In".

11. Factory setting

To reset the radio to the delivery state, please select "YES" in the menu "Factory Reset". Attention:
All previous settings are deleted.
If you select "NO" the process is cancelled.
15