Drain Pump Kit Upk4 Accessory Installation - GE UNC15NP Manual

Drain Pump Kit UPK4 Accessory Installation

BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT –
•
instructions for local inspector's use.
IMPORTANT –
•
governing codes and ordinances.
Note to Installer –
•
instructions with the Consumer.
Note to Consumer –
•
instructions for future reference.
• Skill level
basic mechanical skills.
• Proper installation is the responsibility of installer.
• Product failure due to improper installation is not
covered under the Warranty.
KIT CONTENTS:
Assembly (1)
3 - Rubber Pad (For Pump Mounting) (1)
6 - Plastic Snap Ring (1)
7 - Pump Fixing Bolts (2);
Spring Washer (2); Flat Washer (2)
8 - Pressure Sensor Case Screw (ST/4*12)
(1)
9 - Ground Screw With Washer (M/4*8) (1);
Lock Washer(1)
20
Installation Instructions
Save these
Observe all
Be sure to leave these
Keep these
1
2
WHAT YOU WILL NEED:
Slip joint pliers
Side cutting pliers
NOTE: This pump can be installed in a cube ice machine
or a nugget ice machine.
5
3
6
4
7
8
9
49-1000610 Rev. 2