HAG Lite V380 Installation Manual

HAG Lite V380 Smart CCTV Bulb Camera
1. Install HAG Lite V380 Smart CCTV Bulb
2. Download the V380

Registration".

3. Key in your email address and set a new login password, then click "Register". You will then receive an
email from V380. Click on the link provided in the email to activate your account.
4. Once done, go to your phone Wi-Fi setting; connect to the CCTV Device ID. The device ID is shown on
the CCTV Bulb or can be found on the warranty card (Eg: MV32555398).
5. After connecting to the CCTV built in Wi-Fi, launch V380 app again and log in.
6. You have few option to connect the app to the CCTV:-
*Option 1 – Search device automatically
When you are at V380 home screen, simply drag down the screen and release. It will automatically to
* Option 2 – Connect Manually
Click on the "+" button on the upper right to add a new CCTV device. Choose "Add networked device".
Then, key in the CCTV's device ID under "Device ID" option, and also key in your password. Then click
"Lan search" to connect.
7. Once it's successfully connected, click on "Edit" below the video screen. Key in your password again
and click "Confirm". Your video is now ready to view.
8. By using the built in Wi-Fi from the CCTV, you may only watch the video footage when you are around
the area where your CCTV is installed. You may playback the previous recording from your phone or
choose to take out the Micro SDHC card to view it in your computer.
9. If you wish to view it outside the anywhere you are or when you are at overseas, home Wi-Fi is
needed. To connect to home Wi-Fi, Click on "Device" at the bottom of the app. Choose the device ID
that you are currently connected to. Click "Network Setting" and tick the box for "Station Mode".
Select your Home Wi-Fi, key in the Wi-Fi password and click "Save". By using your own Wi-Fi, you may
able to watch the video footage even when you're outside of your home area, as long as your phone
has mobile data.
1. Pasangkan HAG Lite V380 Smart CCTV Bulb Camera
2. Muat turun aplikasi
"Quick Registration".
3. Masukkan e-mel dan kata laluan yang baru, setelah itu tekan "Register". Nantikan sebuah e-mel dari
aplikasi V380. Tekan pautan yang disediakan dalam e-mel tersebut untuk mengaktifkan akaun anda.
4. Buka penepatan Wi-Fi dalam telefon anda, sambung ke Wi-FI peranti CCTV (Cth: MV32555398).
Peranti ID boleh dijumpai di CCTV Bulb atau di kad warranti.
5. Lancarkan lagi aplikasi V380, dan log masuk.
6. Anda mempunyai dua pilihan untuk menyambung aplikasi ke CCTV:-
Installation Guide
to any E27 bulb holder and switch on.
app from Play Store or Apple Store. Launch the app and click on the "Quick
Panduan Pemasangan
V380 dari Play Store atau Apple Store. Lancarkan aplikasi tersebut dan pilih
pada mana-mana pemegang lampu dan buka suis.