ProCurve J8461A Quick Start Manual

Quick Start Guide
ProCurve Secure Router dl ISDN BRI S/T Backup Module
J8461A
1
P/N: J8461A
S
PECIFICATIONS
Features Clear Channel and Bonding Mode 1 call protocols
Network support for 64 kbps (1 B-channel)
D-channel switch compatibility with AT&T 5ESS,
Northern Telecom DMS-100, National ISDN-1, and
Euro-ISDN
V.54 network loopback support
Standards FCC Part 15 Class A, EN 55022 Class A, EN 61000-3-2,
EN 61000-3-3
ACIF S031, AS/NZS 60950, EN 60950, ETSI TBR 3
Physical Dimensions: 6.35 cd (2.5 in) W x 9.53 cm (3.75 in) D
Operating Temperature: 0°C to 50°C (32°F to 122°F)
Relative Humidity: Up to 95 percent, noncondensing at
30°C (86°F)
Non-Operating Temperature: -20°C to 70°C (-4°F to 158°F)
Non-Operating Relative Humidity: Up to 95 percent,
noncondensing at 30°C (86°F)
Altitude: Up to 3.05 km (10,000 ft)
61195875L1-13B, April 2005
2
Eth 0/2
Eth 0/1
dl
5991-2107
I
NSTALLATION
1. Remove power from the base unit.
2. If the ProCurve Secure Router interface module is already installed
in the ProCurve Secure Router chassis, release the screws at both
edges of the module front panel and slide the module out of the
chassis.
3. Carefully align the P1 connector on the interface module with the
J1 connector on the backup module. Using only fingertip pressure
so that neither circuit board bends or flexes, ensure that the
connectors are firmly seated. Secure the backup module to the
interface module using the screws and standoff posts supplied.
4. Slide the interface module with the backup module attached into
the ProCurve Secure Router option slot until the module is firmly
seated against the chassis.
3
5. Secure the screws at both edges of the module.
6. Connect the cables to the associated device(s).
7. Complete installation of the base unit.
8. Restore power to the base unit.
ISDN B
ACKUP
Pin
1-2
3
4
5
6
7-8
Note
For safety information for the routers and all modules,
please refer to the safety and ESD precautions in the
ProCurve Secure Router Installation Guide included
in your router shipment.
www.procurve.com
I
NSTRUCTIONS
C P
ONNECTION INOUT
Name Description
— Unused
R Network-Receive
T Network-Transmit
T Network-Transmit
R Network-Receive
— Unused
Copyright 2005 Hewlett-Packard Development Company, LP