INITIAL USE
Unpack the package, take out all the accessories and clean them according to the
section of "CLEAN AND MAINTENANCE".
ASSEMBLE THE ROASTING TRAYS
Normally, the grill is opened at an angle of 105 degree .The top roasting tray can be
level with the bottom roasting tray to create a large cooking surface and assemble the
top roasting tray. First open the grill to a angle which is less than 105°, then push the
pushing knob upward with the other hand and hold the handle with one hand to open
the grill to 180°. Insert the trays into the clamps near the hinge and push down the front
end of tray with a little force to snap the tray into place. Then close the grill, just pull the
handle toward you directly.
Control panel description
ON/OFF
switch
OPERATION
1.Plug in the mains power cable into a mains power socket.
2.Press the ON/OFF button to turn the appliance.
After turning on the appliance the LCD screen will display on and see food categories.
3.After turning on the appliance the LCD screen will display ON and the food categories.You can
chosen
food category will illuminate while the other food categories will turn OFF.
4. When the cooking plate reaches the preheat setting emperature, the appliance will make a
BIBIBIBI sound to remind you that the preheat has finished, and the appliance is now ready for food
to be placed
on it. The LCD screen will display the o ogress:Pre-Heating pattern will remain ON, Start to Cook will
turn ON and blink. And the first one progress bar will turn ON and the second one will blink.The
cooking
plates are now ready for food.
5. Place your food on the cooking plates and the close upper cover. The appliance can detect the
food thickness within 5s. The appliance will confirm the heating time according to the food thickness.
Defrost
Bacon
Chicken
Ham
Steak
General grilled meat mode
10
Baked fish
Hamburger
Control dial
OK button
Need help?
Do you have a question about the 800-110V90 and is the answer not in the manual?
Questions and answers