Getting Started; Section 2.1 Verify The System; Launching The Viz Engine Software - NDI NewTek NVG1 Quick Start Manual

This chapter explains how to start the Vizrt software, load a project, and get an output on
screen. After this section, the NVG1 is fully operational and ready to use either the installed
generic graphics packages or other Vizrt projects from other sources, including custom
graphics packages.
1. Make sure the system is turned on
2. If not, open the front panel of the chassis by flipping it down
3. Push the power button on the left with the blue LED ring
4. Once Windows boots up, you need to set the output format
Page | 8
2

GETTING STARTED

VERIFY THE SYSTEM
SECTION 2.1

LAUNCHING THE VIZ ENGINE SOFTWARE

2.1.1