Salonserve W002 Manual

13. The wax heater must be placed on a level surface during use.
14. Do not let cord hang over the edge of a table or counter where it
can be pulled off by children or tripped over unintentionally.
15. Unplug from outlet when not in use.
16. Before using, test hot wax on a small area of skin for temperature
and possible skin reactions.
Safety notes
1. Do not immerse the unit in water, or use it in an area where it could
be splashed.
2. Always unplug the unit when not in use.
3. The heater element is capable of producing a very high
temperature, therefore, NEVER move the heater whilst it contains
hot wax.
4. Do not apply hot wax near eyes or other heat-sensitive areas , or
to any skin injury.
5. Do not touch hot surfaces . Allow this heater to cool before
handling, cleaning and storing.
Cleaning
1. The heater should only be cleaned with a recognised wax
equipment cleaner specifically formulated for the removal of wax
as this will maintain the heater in optimum condition if used
regularly.
2. Never use Surgical Spirit for cleaning, as this may erode the
plastic casing of the heater and cause damage.
3. Do not use other solvents as they could damage the heater and
may produce toxic fumes when the heater is operating.
4. Wax spilled onto the heater casing should be removed as soon as
possible.If the wax is allowed to harden removal is more difficult.
5. It is especially important to keep the on/off switch and the
temperature regulator control dial free of wax.
1000cc Wax Heater
Product code: W002
Careline: 01933 410022
www.salonserve.com