Advertisement
Quick Links
Advertisement
Related Manuals for TEM myTEM SmartHome Starter Set Light
Summary of Contents for TEM myTEM SmartHome Starter Set Light
- Page 1 myTEM SmartHome Quick Guide Starter Set Light...
- Page 2 myTEM SmartHome Quick Guide Starter Set Light Before using the starter set, connect the radio server to the power and LAN network, as shown in the adjacent picture. After 3 minutes all 3 LEDs on the radio server must light up.
- Page 3 myTEM SmartHome Quick Guide Starter Set Light 1. Home screen of the app Attention: Make sure that your mobile phone is connected to the WLAN. Otherwise it cannot connect to the radio server. When the app is started for the first time, the following selection appears: Select starter set and start the installation Registration with an existing system...
- Page 4 myTEM SmartHome Quick Guide Starter Set Light 2. Starter Set Light To install the starter set «LICHT», please select this one. If there is only one Radio Server in the LAN, its IP address is displayed directly in the next step. If there are several Radio Servers in the LAN, you can start the server search with the magnifying glass and the desired server can be selected.
- Page 5 myTEM SmartHome Quick Guide Starter Set Light In the next steps, the Z-Wave devices are connected to the radio server. To start this process, click on «GERÄTE HINZU- FÜGEN». Now the radio server is coupled with the Z-Wave devices. The exact procedure is described in the operating instructions of the device, which are included in the starter set light.
- Page 6 myTEM SmartHome Quick Guide Starter Set Light After successful addition, the display changes to the menu «Neuen Raum erstellen». A device is always assigned to a room. The room consists of a name and a symbol, which can be selected freely. It serves only for represen- tation purposes.
- Page 7 myTEM SmartHome Quick Guide Starter Set Light The next step is to define the device name and the function block name to be used for the module. This is needed when you have multiple light modules in different rooms in order to different- iate between them.
- Page 8 myTEM SmartHome Quick Guide Starter Set Light After integrating the second device, the display changes to «Raum auswählen». Since a room already exists, the new device can be added to this room. A new room can be created by clicking the «Plus» symbol. If an existing room is selected, the function module is automatically selected.
- Page 9 myTEM SmartHome Quick Guide Starter Set Light In the next step the display jumps back to the device list. The procedure can be repeated for the third device. For certain devices the first part of the serial number is required. It can be scanned via the mobile phone camera with the help of a QR code.
- Page 10 myTEM SmartHome Quick Guide Starter Set Light When all devices of the starter set have been integrated, the display changes to «Passwort ändern». This is how you can reset the administrator password (admin) of the radio server. This password is required to access the radio server. After setting the new password, the display automatically switches to the Favourites view.
- Page 11 myTEM SmartHome Quick Guide Starter Set Light Your system is now available in the local LAN. If you want access from outside your LAN, you can activate the cloud solution. You will need the license key for this. The key is located on the back of the radio server (adhesive).
- Page 12 Development, production and sales TEM AG Triststrasse 8 7007 Chur Switzerland Phone +41 81 254 25 11 info@mytem-smarthome.com Copyright 2020 by TEM AG / Technical changes and improvements reserved / myTEM is a registered business division of TEM Group.
Need help?
Do you have a question about the myTEM SmartHome Starter Set Light and is the answer not in the manual?
Questions and answers